afterburner

My Feedback: (18)

I'm going to be converting a plane over to sbus for secondary functions like gear, brakes, lights etc... and the flying surfaces will be on the pwm outputs of the RX. With what I've already purchased I'll be one sbus connection short so my question is can I use a Y connector coming out of a hub to get the needed additional connection. Thanks.

Marty

OhD

yes

Bax

My Feedback: (11)

Yes, you can use a "Y" connector on the S-BUS to add a line. That's basically what the S-Bus hub is...only it has more than two connections.