How do I copy a model from 14sg mode 2 to 14sg Mode 1 (Heli model).
04-12-2015, 06:11 AM
#1
Junior Member
Thread Starter
Join Date: Apr 2015
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
How do I copy a model from 14sg mode 2 to 14sg Mode 1 (Heli model).
Hi Guys,
Does anyone know the correct process to share a model from a Futaba 14sg mode 2 with another user using a Futaba14sg mode 1?
I fly mode 2 and my mate flies mode 1.
He wants to be able to fly my helis to help me with the tuning.
I know how to copy the model to the memory card and read it into the second Tx but when changing the channel map to suit the mode 1 user something goes wrong and my Vbar setup heli doesn't work correctly. The swash tilts forward hard when switching into TH.
Regards
Neil
Sorry originally posted this question under general discussion which I now see was the wrong place.
Does anyone know the correct process to share a model from a Futaba 14sg mode 2 with another user using a Futaba14sg mode 1?
I fly mode 2 and my mate flies mode 1.
He wants to be able to fly my helis to help me with the tuning.
I know how to copy the model to the memory card and read it into the second Tx but when changing the channel map to suit the mode 1 user something goes wrong and my Vbar setup heli doesn't work correctly. The swash tilts forward hard when switching into TH.
Regards
Neil
Sorry originally posted this question under general discussion which I now see was the wrong place.
04-13-2015, 05:48 AM
#2
My Feedback: (11)
The most likely problem is that the channel order in the transmitters are different. Also, make sure the functions are set up correctly. When you look at the functions, make sure they output to the correct channels. All other settings in the transmitters have to be identical in those models.
