18SZ Switch change
#1
Thread Starter
My Feedback: (41)
18SZ Switch change
I've got one of the new radios backordered and since they're supposed to be here shortly, I'm wondering if Tower can send over to you guys and I'd like the momentary "trainer" switch replaced with a long two position switch? I did this to my 18MZ but that was easy for me. I'd like it changed as if that switch is on the top left rear, that's my gear switch. If it's on the top right rear, that's my kill switch. Then have you guys ship it out to me?
It's that way on all my models and radios and I'm 'getting too old to learn something new especially for those two rather critical functions.....
It's that way on all my models and radios and I'm 'getting too old to learn something new especially for those two rather critical functions.....
#3
My Feedback: (11)
We've not gotten any definitive answer, but if Futaba carries through what they've done in the past, then the "airplane" versions will have the spring switch at the left rear, and the "heli" versions will have it at the right rear.
On my desk, I have a, 8FG, a 12FG, a 12Z, a 14MZ, and an 18MZ. Two are "heli" and three are "airplane". They are configured as I stated above.
If you order from your dealer and make your wish known, we can likely swap the switch before the transmitter's shipped from here. Have your dealer talk to their GP rep.
On my desk, I have a, 8FG, a 12FG, a 12Z, a 14MZ, and an 18MZ. Two are "heli" and three are "airplane". They are configured as I stated above.
If you order from your dealer and make your wish known, we can likely swap the switch before the transmitter's shipped from here. Have your dealer talk to their GP rep.