R7006SB and 3151 servo
#1
Thread Starter
My Feedback: (17)
Join Date: Jul 2003
Location: Phoenix,
AZ
Posts: 321
Likes: 0
Received 0 Likes
on
0 Posts
R7006SB and 3151 servo
I am having problems using this layout. The 3151 for throttle goes to its failsafe position after a few seconds (with Tx on). The rest of the channels work fine.
Channel 3 works fine with other servos.
The 3151 works fine with 617 receiver.
I am using a 4 cell NiMh pack, 14SG Transmitter. The 3151 connected directly as PWM output (not SBus).
Channel 3 works fine with other servos.
The 3151 works fine with 617 receiver.
I am using a 4 cell NiMh pack, 14SG Transmitter. The 3151 connected directly as PWM output (not SBus).
Last edited by Yak13; 09-21-2017 at 09:03 AM. Reason: Added info