Futaba T7CHP sailplane mixing ability?
#1
Senior Member
Thread Starter
My Feedback: (3)
Join Date: Jul 2003
Location: Turtletown, TN
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
Futaba T7CHP sailplane mixing ability?
Hi, I love my 7C for heli flying but I just recently purchased a RennyII sailplane that has V-tail and 4 servos in the wing. After reading on the Futaba web site I managed to get everything working ok except I need one more ability that the 7C might not be capable of. The channels are:
1: Right aileron
2: V-tail
4: V-tail
5: Left flap
6: Left aileron
7: Right flap
Air brake produces butterfly or crow ok and the flaps lower on switch B....but how do I get wing reflex? The airbrake setting has used 2 p-mixes leaving only one left. I need a setting which will raise and lower all wing surfaces together for camber and reflex....is this possible?
Thanks
Mark
1: Right aileron
2: V-tail
4: V-tail
5: Left flap
6: Left aileron
7: Right flap
Air brake produces butterfly or crow ok and the flaps lower on switch B....but how do I get wing reflex? The airbrake setting has used 2 p-mixes leaving only one left. I need a setting which will raise and lower all wing surfaces together for camber and reflex....is this possible?
Thanks
Mark
#2
Senior Member
Thread Starter
My Feedback: (3)
Join Date: Jul 2003
Location: Turtletown, TN
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
RE: Futaba T7CHP sailplane mixing ability?
I did manage to work my way to a point that I have camber on the left position of the VR knob....normal in the middle position of the VR knob...and crow or butterfly on the right position of the VR knob. While awkward to work the knob and fly it might be the best I can do with the 7C.
Thanks
Mark
Thanks
Mark