pistons and rings for quadra engines
#2
My Feedback: (5)
If he doesn't have it he may ask you to send him the piston and jug and he will make them for you. He did that for me a few times .
http://www.rcuniverse.com/forum/engi...ton-rings.html
#3
Thread Starter
My Feedback: (38)
there are two groupings , the early quadras, which were pioneer cylinder heads and pistons, early eightys.
the later quadras had different rings and pistons. from what frank has told me , the later ones had thicker rings.
so what i need is a piston thats 2.060 diameter and is a chainsaw engine piston and rings, most likely pioneer P-51 60 OR 62 .
so i need to find this stuff , aint going to be easy
the later quadras had different rings and pistons. from what frank has told me , the later ones had thicker rings.
so what i need is a piston thats 2.060 diameter and is a chainsaw engine piston and rings, most likely pioneer P-51 60 OR 62 .
so i need to find this stuff , aint going to be easy
#4
Join Date: Dec 2001
Location: Summerfield,
NC
Posts: 1,946
Likes: 0
Received 0 Likes
on
0 Posts
Quadra's were imported from Canada by Klause Novak and his son, but that's the best I can do for you, may be doing a search might help you out. Wish I had more info for you.