What pipe for DLE 35RA
11-08-2016, 04:12 PM
#1
Thread Starter
What pipe for DLE 35RA
Hi Guys
I'm running a DLE 35 RA in a Capiche 140 which is a bit on the heavy side at 6.75 Kg without fuel. The engine has been run for about 2 hours and I'm getting 8,100 rpm on an 18x8 Falcon Beechwood prop. I tried an 18x10 Falcon Beechwood but that dragged the revs down to 7,500 and its airborne performance was not as good.
My question then is what pipe would be good to give around 500 rpm more on the 18x10 prop?
I'm running a DLE 35 RA in a Capiche 140 which is a bit on the heavy side at 6.75 Kg without fuel. The engine has been run for about 2 hours and I'm getting 8,100 rpm on an 18x8 Falcon Beechwood prop. I tried an 18x10 Falcon Beechwood but that dragged the revs down to 7,500 and its airborne performance was not as good.
My question then is what pipe would be good to give around 500 rpm more on the 18x10 prop?
