whats the biggest prop for a g-62 in a 1/3 scale champ?
11-13-2016, 09:14 PM
#2
Senior Member
Join Date: Jan 2006
Location: Pitt Meadows,
BC, CANADA
Posts: 862
Likes: 0
Received 0 Likes
on
0 Posts
I'm running a Xoar wood 24/10 on a G62 (mag) in a pacific Aeromodels Gee bee Y, don't remember the rpm but works very well. Good speed and slows down well for landing.
We also run a Zinger 24/8 on a 62(mag) in a 1/3 scale Sopwith pup.
We also run a Zinger 24/8 on a 62(mag) in a 1/3 scale Sopwith pup.
11-14-2016, 01:39 AM
#3
Join Date: Feb 2002
Location: Billund, DENMARK
Posts: 575
Likes: 0
Received 0 Likes
on
0 Posts
I have used both Fiala and Menz 26x8 on my stock G-62.
The Menz only did about 5300 rpm, but still pulled ok, and the Fiala was just about 6K due to it loading a lot less than the Menz.
The Fiala was used on a 1:3 scale Tripacer and provided plenty of speed an power.
The Menz only did about 5300 rpm, but still pulled ok, and the Fiala was just about 6K due to it loading a lot less than the Menz.
The Fiala was used on a 1:3 scale Tripacer and provided plenty of speed an power.
