breaking down a 102 evo
#1
Senior Member
Thread Starter
My Feedback: (2)
Join Date: Dec 2001
Location: brooklyn, NY
Posts: 568
Likes: 0
Received 0 Likes
on
0 Posts
breaking down a 102 evo
has anyone taken a 102 evo apart?
I have the case split but I can't go any further. not sure how.
I had to drill out one of the aluminum head bolts because it broke inside due to a crash.
the guy who drilled it for me didn't tape the case and the metal scrapings were all over the crank.
I've cleaned it pretty good but would like to remove the crank while I'm in here... is the electronic mechanism something to stay away from? I'd like to have a look at it.
I have the case split but I can't go any further. not sure how.
I had to drill out one of the aluminum head bolts because it broke inside due to a crash.
the guy who drilled it for me didn't tape the case and the metal scrapings were all over the crank.
I've cleaned it pretty good but would like to remove the crank while I'm in here... is the electronic mechanism something to stay away from? I'd like to have a look at it.