Which Bisson muffler would give the best results?
07-01-2006, 03:49 PM
#1
Senior Member
Thread Starter
My Feedback: (21)
Join Date: Jan 2004
Location: Scottsville,
KY
Posts: 1,242
Likes: 0
Received 0 Likes
on
0 Posts
Which Bisson muffler would give the best results?
I'm currently finishing my Carl Goldberg Pitts M12 with MVVS 1.6 gasser in the nose. I've got both the Bisson inverted muffler: http://bissonmufflers.com/en/muffler...ting_id=114035 and the inverted pitts: http://bissonmufflers.com/en/muffler...ing_id=1135791
Which one of these mufflers should produce the best performance? Would they both be the same? They both fit in the cowl with the inverted looking a little better when I cut the cowl but not a huge difference. Of course, the pitts muffler is a lot more money so I could sale it since it's still NIB. Thow me a bone....
Which one of these mufflers should produce the best performance? Would they both be the same? They both fit in the cowl with the inverted looking a little better when I cut the cowl but not a huge difference. Of course, the pitts muffler is a lot more money so I could sale it since it's still NIB. Thow me a bone....
07-01-2006, 07:17 PM
#2
Senior Member
My Feedback: (29)
Join Date: Jan 2005
Location: San Antonio,
TX
Posts: 1,402
Likes: 0
Received 0 Likes
on
0 Posts
RE: Which Bisson muffler would give the best results?
Cad,
The inverted will be more powerful with more noise. Both will produce more power with slightly more noise, if you trim off the chrimped ends.
Dave
The inverted will be more powerful with more noise. Both will produce more power with slightly more noise, if you trim off the chrimped ends.
Dave
07-02-2006, 02:41 PM
#4
Senior Member
Thread Starter
My Feedback: (21)
Join Date: Jan 2004
Location: Scottsville,
KY
Posts: 1,242
Likes: 0
Received 0 Likes
on
0 Posts
RE: Which Bisson muffler would give the best results?
Awesome, the inverted is the one I'll put on. I filled each muffler with water to compare volume and the pitts was just a little more than the inverted muffler but the inverted looks so much better in a round cowl with less to cut out.
