Stupid Zenoah G20 question.
#1
Stupid Zenoah G20 question.
I'm considering the switch from glow to gas and am thinking of the G20 so forgive my ignorance but.... From looking at pics of the G20 it looks like the jug is bolted to the crankcase with 4 bolts....So my question is this: can the cylinder/jug be rotated 180deg so that the carb and exhaust are on the other side?
#4
My Feedback: (1)
Join Date: Jan 2002
Location: Riverton,
WY
Posts: 3,114
Likes: 0
Received 0 Likes
on
0 Posts
RE: Stupid Zenoah G20 question.
It has pinned rings to keep the ends out of ports. If you don't turn the piston then there is a very good chance that it will catch the end of a ring in a port and make expensive noises.
#7
Senior Member
Join Date: Apr 2004
Location: SydneyNSW, AUSTRALIA
Posts: 932
Likes: 0
Received 0 Likes
on
0 Posts
RE: Stupid Zenoah G20 question.
ORIGINAL: meowy84
I'm considering the switch from glow to gas and am thinking of the G20 so forgive my ignorance but.... From looking at pics of the G20 it looks like the jug is bolted to the crankcase with 4 bolts....So my question is this: can the cylinder/jug be rotated 180deg so that the carb and exhaust are on the other side?
I'm considering the switch from glow to gas and am thinking of the G20 so forgive my ignorance but.... From looking at pics of the G20 it looks like the jug is bolted to the crankcase with 4 bolts....So my question is this: can the cylinder/jug be rotated 180deg so that the carb and exhaust are on the other side?
The manual states you can rotate the cylinder, but you also need to rotate the piston.