SYSSA 30CC GAS MADE IN USA
#6276
Seems as though there is a new technology. Once the cylinder is coated, the honing process takes care of all the issues you're talking about. Not real sure that there will actually be a glittery texture on the outside, the discussion about that was just banter about the contents of the finish emulsion. We will of course thoroughly vet the process but have extreme confidence that this is an amazing technology for our purposes. In the event that for some reason it doesn't meet our standards, we have the hard chrome option still available.
Sincerely, Richard
#6277
My Feedback: (86)
Join Date: May 2005
Location: Mayhill, New Mexico TX
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
Could be. I really have no idea. I'm just now learning a little bit about it and don't know what I'm talking about. I've heard about nitride and carbide and hard chrome and all the acids and electrodes involved. It's engineering way beyond me and I've got a Ph.D. (Post hole digger)
#6278
My Feedback: (86)
Join Date: May 2005
Location: Mayhill, New Mexico TX
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
As I promised, I'm trying to keep everyone in the loop as to what's going on with Syssa Engines. We have solved the issue of finding a high quality hard chrome plating for the cylinders and the first production run is back in South Carolina and going through the final honing process. The shipping date for these cylinder is January 21st. At that time, everyone that has an engine in my shop needing cylinder work will be notified and their engines repaired promptly. After that, I will begin to take orders for new engines. These will be assembled when ordered in my shop, by me. They will be set up and test run prior to shipping. So, If you think you might want one, now would be a good time to let me know.
Steve
Steve
#6279
Join Date: Feb 2007
Location: Hilton,
NY
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Steve!!! For helping Todd out with these engines. It looks like a GREAT product. I sent you a PM, But I can't tell if it went to you or not? I'm still getting used to RCUs new format. Thanks Kevin
#6280
My Feedback: (86)
Join Date: May 2005
Location: Mayhill, New Mexico TX
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
Steve
#6282
My Feedback: (86)
Join Date: May 2005
Location: Mayhill, New Mexico TX
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
Heard from the production manager on Monday. We're getting very close to the release. Seems as though US Chrome has been the bottleneck in getting the V3 out to you guys. Todd expressed his frustration with how long this taking. He used the strongest language I've heard him utter - "I'm doing my darndest" . Good thing he can't hear my West Texas adjectives. :-)
SS
SS
#6285
Join Date: Sep 2006
Location: Shorewood, WI
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
Just an alert to everyone here, this guy has a history of these sorts of posts. I've also seen him offer some good advice, but for whatever reason at times he gets ticked off and then they are like the above. Just a few weeks ago he got himself in hot water and had almost all of his posts on a "Cool Power/cleanliness thread discussion deleted by the moderators. Sometimes he needs to eat a Snickers and then he is OK.
Lars
Lars
#6288
Join Date: Sep 2006
Location: Shorewood, WI
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
I've been to Aus. on three occasions... never had a problem. It's a terrific country and every Australian I met there or anywhere else for that matter has been great. The next time I'm there, let's get together, I'm sure we could set that up.
Lars
Lars
#6290
Red Raider - I have two Syssa engines and they came with the 813 carbs, is there a better carb that can be used on them now?
I've been hesitant to put one on a plane due to the support issues I've experienced in the past. I'm going to try one of the engines on the Bell Hop plane that I'm building.
Thanks.
I've been hesitant to put one on a plane due to the support issues I've experienced in the past. I'm going to try one of the engines on the Bell Hop plane that I'm building.
Thanks.
#6292
There may be several hundred Tillotson carbs. I don't see any listed on the Syssa website. I would like to try the "one" that works on my motor without buying and trying all of them. Can you give me any hints on the one that Syssa is using?
#6293
Join Date: Feb 2006
Location: Norwalk,
OH
Posts: 313
Likes: 0
Received 0 Likes
on
0 Posts
Buy it from them then you don't have to buy several hundred. Just saying.
#6294
Syssa does not have it for sale as a separate item, and Tillotson, or any distributor will need more specific information than just "the Tillotson carb."
I'll try one more time. Is there anyone out there, who has a Syssa, and can provide any useful information on what model of carb, other than just Tillotson, is actually on it?
#6296
My Feedback: (86)
Join Date: May 2005
Location: Mayhill, New Mexico TX
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
Who is them?
Syssa does not have it for sale as a separate item, and Tillotson, or any distributor will need more specific information than just "the Tillotson carb."
I'll try one more time. Is there anyone out there, who has a Syssa, and can provide any useful information on what model of carb, other than just Tillotson, is actually on it?
Syssa does not have it for sale as a separate item, and Tillotson, or any distributor will need more specific information than just "the Tillotson carb."
I'll try one more time. Is there anyone out there, who has a Syssa, and can provide any useful information on what model of carb, other than just Tillotson, is actually on it?
steve
#6298
My Feedback: (19)
Join Date: Feb 2004
Location: Raeford, North Carolina
Posts: 3,988
Likes: 0
Received 2 Likes
on
2 Posts
Who is them?
Syssa does not have it for sale as a separate item, and Tillotson, or any distributor will need more specific information than just "the Tillotson carb."
I'll try one more time. Is there anyone out there, who has a Syssa, and can provide any useful information on what model of carb, other than just Tillotson, is actually on it?
Syssa does not have it for sale as a separate item, and Tillotson, or any distributor will need more specific information than just "the Tillotson carb."
I'll try one more time. Is there anyone out there, who has a Syssa, and can provide any useful information on what model of carb, other than just Tillotson, is actually on it?
Incidentally, I'm about to put this Syssa up for sale. You know I take care of my stuff, so contact me if you're interested. Runs awesome. I'll be putting it up here in the classifieds within the next day or so. It will include the mounts, spinner, and several nice wood props, as well as some carb kits and other parts and service items, banjo bolts for smoke, medallion, etc. I'll even ship it in a new Syssa box. Set up with the longest standoffs, I believe.
~ Jim ~
Last edited by PacificNWSkyPilot; 03-21-2016 at 06:35 PM. Reason: Adding photo
#6299
Got the Syssa mount bolts and throttle servo set up on the Bell Hop.
I finished the covering on the plane, so it is time to run the engine to see if it has lost anything during its two year nap.
I finished the covering on the plane, so it is time to run the engine to see if it has lost anything during its two year nap.
#6300
Finished the maiden flight on the plane. The engine quit about 4 min into the first flight which was not a good thing. Doing a deadstick landing on the first flight is my worst nightmare, but since I was flying high and close to the field, there was no problem getting it down in one piece. The plane flys great, like a big trainer, I'm thinking pretty close to a Long John. Flew three more times that day, the engine keep cutting out during maneuvers. All landings were deadsticks.
During troubleshooting at home, I found that the fuel line had bubbles in it at the engine connector, but not at the outlet of the fuel tank. Turns out that the "Y" connector between the tank and engine was allowing air to enter from the fill tubing. I've never had that happen before. I put in a new connector and that solved the problem.
Now all I need to do is finish the plane, paint, decals, cowl, pilot, canopy, etc. Hope that doesn't take me another five years. Will put pictures of the progress on the Bell Hop build forum.
During troubleshooting at home, I found that the fuel line had bubbles in it at the engine connector, but not at the outlet of the fuel tank. Turns out that the "Y" connector between the tank and engine was allowing air to enter from the fill tubing. I've never had that happen before. I put in a new connector and that solved the problem.
Now all I need to do is finish the plane, paint, decals, cowl, pilot, canopy, etc. Hope that doesn't take me another five years. Will put pictures of the progress on the Bell Hop build forum.