griz11

I'm looking for a pylon type tank for use in a dragster. I've found some but they are large and I need a maximum of 2oz for mine. The bladder should solve some problems I have with fuel delivery and I'm hoping contamination of the fuel by the water in the exhaust pressure line. Anyone out there know of a small tank I might try and use.

Thanks
Griz

Super Splatter

http://centralhobbies.com/

3 or 4 oz might be the smallest Tettra tank you can get

pdxpaul

My Feedback: (1)

The 3 oz Tettra is the smallest commercial bubbleless tank I could find. I got one from Central, it works very well. I also make 2 oz bubbleless tanks, from a Dubro clunk tank, helium balloon and pressure nipple, for club 20 racers. I get about one season per balloon, but they work pretty good too.

SmokinJoe

You can make good bladders from baby bottle liners. The combat guys have been doing it for years. I seal the neck of the tank with silicone sealer.

TIA

Just stand proud and smile when in line at the grocery store!

No Problem!