TailDragger RC Barnstormers series Pitts 12 bipes
#1
Thread Starter
My Feedback: (197)
TailDragger RC Barnstormers series Pitts 12 bipes
Ok guys. We have been BUSY working on some new product launch's! We are EXCITED to let you know we have our own exclusive line of aircraft! Two wings are better than one!!!Welcome our Barnstormers series pitts m-12.. There is also a 50cc and 100 cc CHRISTEN EAGLE in the works!
Soon we will have to offer a 50cc AND 100-150cc pitts m-12 AND we can do custom covering scemes!!
This line has been sold before and many improvements have been made on down the road. Even some I didn't know about and they are pretty impressive. SO PLEASE don't think these are coming from a popular well known direct-buy china website. These are custom built to a much higher standard and include better hardware, covering, and fittings
Some features.........
Oracover covering (not chinakote)
Redesigned I - struts and cabane wing attach points (thumb screws for I-struts and tubed aluminum cabane absolutely no wing shifting unlike the aluminum flatstock)
Carbon fiber hardware!
NO FLYING WIRE'S REQUIRED on the m-12
Our lightweight aluminum cooling louvers pre-installed into the cowl
We don't have an estimated ETA yet but we are looking into late summer/early fall.
Also if you guys send me some sketch's we might consider a new color sceme.
Soon we will have to offer a 50cc AND 100-150cc pitts m-12 AND we can do custom covering scemes!!
This line has been sold before and many improvements have been made on down the road. Even some I didn't know about and they are pretty impressive. SO PLEASE don't think these are coming from a popular well known direct-buy china website. These are custom built to a much higher standard and include better hardware, covering, and fittings
Some features.........
Oracover covering (not chinakote)
Redesigned I - struts and cabane wing attach points (thumb screws for I-struts and tubed aluminum cabane absolutely no wing shifting unlike the aluminum flatstock)
Carbon fiber hardware!
NO FLYING WIRE'S REQUIRED on the m-12
Our lightweight aluminum cooling louvers pre-installed into the cowl
We don't have an estimated ETA yet but we are looking into late summer/early fall.
Also if you guys send me some sketch's we might consider a new color sceme.
#2
My Feedback: (11)
Join Date: Mar 2002
Location: Randolph,
NJ
Posts: 2,313
Likes: 0
Received 0 Likes
on
0 Posts
RE: TailDragger RC Barnstormers series Pitts 12 bipes
Im looking for a pitts 12 that can handle my dads Moki 215cc radial.. We were looking into the Thunder Tiger 40%.. At almost 4000 sq.in. it should carry the moki just fine..
Do you have a website? When will the Eagle be out? Id be leaning more towards the 100cc version..
Thanks,
Frank
Do you have a website? When will the Eagle be out? Id be leaning more towards the 100cc version..
Thanks,
Frank
#3
Thread Starter
My Feedback: (197)
RE: TailDragger RC Barnstormers series Pitts 12 bipes
Thanks for the interest.. We are currently working on the proto-type christen eagle.. The cowl is 13.5" wide so I am not sure on the moki.. Our website is www.taildraggerrc.com
Thanks! god bless. chad
Thanks! god bless. chad