Help - Pilot Sbach 29%, 87" span
#1
Member
Thread Starter
Join Date: Aug 2005
Location: Salem,
VA
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Help - Pilot Sbach 29%, 87" span
Can anyone help me with a measurement? Trying to sort out engine - header - pipe combo but have not received the model yet. Looking for the vertical distance from the center line of the crankshaft to the center line of the canister tunnel. I'm guessing in is close to 50mm or 2". Thanks for your help.
#3
Member
Thread Starter
Join Date: Aug 2005
Location: Salem,
VA
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
RE: Help - Pilot Sbach 29%, 87
Thanks dryverman! I think we are on the same page.
If you mount the engine on the firewall as per instructions and measure from the crankshaft centerline at the firewall straight down to the centerline of the canister tunnel your answer is 4-1/4" .
Correct?
If you mount the engine on the firewall as per instructions and measure from the crankshaft centerline at the firewall straight down to the centerline of the canister tunnel your answer is 4-1/4" .
Correct?