Composite-ARF Extra 260 Build Thread
#1
Thread Starter
My Feedback: (39)
Composite-ARF Extra 260 Build Thread
Hello all,
If you're interested, the build thread for my Composite-ARF "Yellow Kiwi" scheme Extra 260 is posted in the Flying Cirkus "Assembly Required" forum.
The build is going well. Dave Stoik is also putting some pictures in from his build. He's got a turquoise Kiwi scheme.
http://www.rcuniverse.com/forum/m_3964906/tm.htm
The canopy was the latest step. It was done using the reverse vacuum method.
Later,
Dean
If you're interested, the build thread for my Composite-ARF "Yellow Kiwi" scheme Extra 260 is posted in the Flying Cirkus "Assembly Required" forum.
The build is going well. Dave Stoik is also putting some pictures in from his build. He's got a turquoise Kiwi scheme.
http://www.rcuniverse.com/forum/m_3964906/tm.htm
The canopy was the latest step. It was done using the reverse vacuum method.
Later,
Dean
#2
Thread Starter
My Feedback: (39)
RE: Composite-ARF Extra 260 Build Thread
KS cross-over headers and MTW 110 canisters have been installed.
http://www.rcuniverse.com/forum/m_39...tm.htm#4010057
http://www.rcuniverse.com/forum/m_39...tm.htm#4010057
#3
Thread Starter
My Feedback: (39)
RE: Composite-ARF Extra 260 Build Thread
The "cooling" cut-outs have been made and the cowling baffles have been installed.
http://www.rcuniverse.com/forum/m_39..._5/key_/tm.htm
The cowling baffles were made from a carbon/balsa plate from R/C Blimp Productions.
http://www.rcblimpproductions.com/balsaplate.html
http://www.rcuniverse.com/forum/m_39..._5/key_/tm.htm
The cowling baffles were made from a carbon/balsa plate from R/C Blimp Productions.
http://www.rcblimpproductions.com/balsaplate.html