ECOMRC Stinson 108
#1
Senior Member
Thread Starter
Join Date: May 2012
Location: , OR
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
ECOMRC Stinson 108
Looking at the other Stinson thread I see people talking about the 108 so I'll start this thread.
I have one and have flown it with the PTE 36 engine. I had some trouble with my HS 645MG aileron servos moving on their own and replaced them with digital servos which after about three flights seem to be working fine. Right now the plane isn't flying as I found a crack in the prop drive hub in line with the keyway and I'm waiting for a replacement.
It flys good but the last time out I was making crappy landings Been getting some practice in with my 1/4 Scale Hangar 9 Cub so maybe by the time the Stinson is back in the air I'll be making better landings :-)
People at the field like the looks of it.
I have one and have flown it with the PTE 36 engine. I had some trouble with my HS 645MG aileron servos moving on their own and replaced them with digital servos which after about three flights seem to be working fine. Right now the plane isn't flying as I found a crack in the prop drive hub in line with the keyway and I'm waiting for a replacement.
It flys good but the last time out I was making crappy landings Been getting some practice in with my 1/4 Scale Hangar 9 Cub so maybe by the time the Stinson is back in the air I'll be making better landings :-)
People at the field like the looks of it.
#2
My Feedback: (23)
Join Date: Mar 2011
Location: monroeville, NJ
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
RE: ECOMRC Stinson 108
I have the same airplane waiting for them to cut the corn at the field behind my house so I can maiden this bird . Im running the same engine as you , and I ground ran it it seems to run real strong looking foward to flying in the next few weeks Ill report the results.