FlyerInOKC

My Feedback: (6)

I don't recall the Holiday Inn Express commercials but John and I are at the age the CRS kicks in. The funny thing my wife still can sing all the old cigarette jungles from back in the late 50s and early 60s!

squirrly

My Feedback: (3)

Do you guys remember that movie Billybob Thorton was in and he tells a joke; " There were these two fellers one was from Arkansas, get it". Funny stuff.
Jeff


Ok. I looked up the movie he was in and if you get a chance you should see it.

Sling Blade, his character is Karl.

Melchizedek

Hope you don't mind Robert. Will take down if you do.

https://www.youtube.com/watch?v=l8Ah8WTL2i8 Kevin

squirrly

My Feedback: (3)

If only it was that easy...I wish. Funny stuff!!

Jeff

acerc

I have not seen that one, hilarious!!
That's me on maiden day, "I'm not a pilot and I didn't stay at a HI last night", ohhhh crap!!!

acerc

I picked up the picnic table yesterday as well as, well, the truck and trailer was full. Spent the evening putting things away, went flying this morning then put the rest of the stuff away. I got three flights in on the little Pitts, man what a hot rod. Currently charging it back up for tomorrow morning, afterwards I should be able to get some sanding done on this one. The electrical supplies came in so things are just waiting on me.

squirrly

My Feedback: (3)

Sounds good Rob. Have fun at the field.

Jeff

John_M_

That is a funny commercial... not seen anything like that here on the west coast, but back then I didn't watch a whole lot of television, so I could have just missed it... the wife has a memory like an elephant, and she doesn't recall it either.


John M,

John_M_

On the maiden, just close your eyes and think RCM Trainer 40



John M,

Cub Flyer Fresno

Don't forget to click you heals together three times and repeat "There's no one like me as a pilot, there's no one like me as a pilot..."

acerc

The sanding has begun. What I like to do is put a center line for reference as to not over sand. But I also put a second line just a tad offset of the centerline to let me know when close but the photo was of only the center.

FlyerInOKC

My Feedback: (6)

Don't hold back tell us what you really think of your loaner laptop.

flyingagin

HOW TO WIN SOME REALLY BIG BROWNY POINTS

Buy a new LT and sit it were the wife normally sets, with a vase of flowers

Ken

acerc

Let me put it this way, mine cost just over $900 and this one just over $300. So yes! This one is a piece of junk!

acerc

Mine will be repaired for less than $200, far better route than a new one.

acerc

The tail feathers are sanded and ready. I gave this the same deflection ability as mine which is 50°. On my little one's I don't use but around 20° and is more than enough for me. But you may want to go 3D with this thing and will need the 50°.

squirrly

My Feedback: (3)

Sounds good Robert, I just might need that little bit more for 3D. Though my 3D is not that extreme to some it will be as scale as I can fly it.
Jeff

acerc

The fuse has been sanded. It is getting late enough I decided to leave the wings for tomorrow. So being all sweaty and such got cleaned up. Now I am going to spend the evening makeing the linkage for the ele's and rudder.

acerc

The ele's are done, need to break out the book and see what EMHW has in mind for the rudder. And I will get right on that first thing in the morning.

Have I said yet how much I miss my computer? I really miss my laptop!!

acerc

Is it morning yet, LOL. The rudder is a simple pull-pull so I hooked up the connectors and will install the cable tomorrow.

acerc

And the cable is installed. Now to make exit plates. Woo Hoo!

stevegauth30

You seem to be working at a pretty good pace .

squirrly

My Feedback: (3)

Robert doesn't mess around...Awesome!!

Jeff

acerc

Went to rehab, returned and installed the cover plates. Once they are totally cured they will get contour sanded then on to the nose panels.

Melchizedek

Hey Robert,

Whens your laptop get out of rehab? We are photo starved .

Oh, yea, how's the back ?

Kevin