Bulldog build
01-29-2018, 04:25 PM
#1002
Thread Starter
Join Date: Sep 2006
Location: The Sunshine state, when it's not raining!
Posts: 8,131
Likes: 0
Received 2 Likes
on
2 Posts
Thanks Vincent.
I have been snooping around the site for a couple day's, it seems RCU is operating like days of ole. Only thing I am not liking is when I reduce the unwanted forums it only last while I'm here, have to reduce them each time I open RCU. As for getting back to building, it will still be a couple weeks. My trailer is full of discardable's from our old house, the shop is over flowing with airplanes from the trailer, over flow airframes in a shed. Need to get all that sorted, cleared out, cleaned up, then go over/ through all airframes. Then I can break out on an existing build..... which is a Challenger being built as the Bulldog 1.
I can post all the pics of up to where I am at if wanted.
I have been snooping around the site for a couple day's, it seems RCU is operating like days of ole. Only thing I am not liking is when I reduce the unwanted forums it only last while I'm here, have to reduce them each time I open RCU. As for getting back to building, it will still be a couple weeks. My trailer is full of discardable's from our old house, the shop is over flowing with airplanes from the trailer, over flow airframes in a shed. Need to get all that sorted, cleared out, cleaned up, then go over/ through all airframes. Then I can break out on an existing build..... which is a Challenger being built as the Bulldog 1.
I can post all the pics of up to where I am at if wanted.
Last edited by acerc; 02-02-2018 at 09:51 AM.
01-29-2018, 11:49 PM
#1003
Great Job Robert,
if everbody need cutting plans as dxf and STL/IGES Files (cowling/shoes/glasses) to build a Pitts S2 Prometheus 2 (~90inch) in Size upto 100ccm.. I offer the plans in my Website www(dot)modellbau-raschke(dot)de
or conatct my with PM. On my Website are many Picture from buildes Modells ( WolfPittsPro, BullDog2 etc )
Best Regards
Jürgen
if everbody need cutting plans as dxf and STL/IGES Files (cowling/shoes/glasses) to build a Pitts S2 Prometheus 2 (~90inch) in Size upto 100ccm.. I offer the plans in my Website www(dot)modellbau-raschke(dot)de
or conatct my with PM. On my Website are many Picture from buildes Modells ( WolfPittsPro, BullDog2 etc )
Best Regards
Jürgen
02-02-2018, 06:26 PM
#1004
Thread Starter
Join Date: Sep 2006
Location: The Sunshine state, when it's not raining!
Posts: 8,131
Likes: 0
Received 2 Likes
on
2 Posts
Ok, I have went through four airframes and they are ready to go in the trailer. Should be getting the trailer empty and cleaned this weekend. Once the planes are out of the shop I will jump on getting the Eagle back together and ready for Tog Gun 2018, hope it goes better than last year. Once all that is done, shooting for the end of next week, I can get back on the Bulldog build. The build is 90% complete and should not take long to get it ready for covering. This one is getting Mono or Ultracote instead of my usual fabric as it is just for a fun flyer. The shop is 14x24, the pics show how little room I have in the shop.
Last edited by acerc; 02-02-2018 at 06:29 PM.
02-05-2018, 11:28 AM
#1015
Thread Starter
Join Date: Sep 2006
Location: The Sunshine state, when it's not raining!
Posts: 8,131
Likes: 0
Received 2 Likes
on
2 Posts
As of ten minutes ago the shop is cleaned out and cleaned up. Now I just have to get in the mood to build, quite honestly I figured once I cleaned it it would hit but I guess the house rebuild has wore the build out of me. I have got to get to the Eagle, and soon.....We'll see what tomorrow brings, would really like to go flying... I think....
02-05-2018, 09:19 PM
#1019
My Feedback: (2)
Robert,
Here is the beef. While your out flying in sunny Florida, most of the country can only wish for spring and better weather to arrive. (LOL)
Been a long winter and it's only half over.
On top of that its too cold to even go out in the garage to work.
Fly well.
Regards - J Tab
Here is the beef. While your out flying in sunny Florida, most of the country can only wish for spring and better weather to arrive. (LOL)
Been a long winter and it's only half over.
On top of that its too cold to even go out in the garage to work.
Fly well.
Regards - J Tab
02-06-2018, 02:44 AM
#1020
Nice job on your workshop, I'm a bit jealous! It's cold here in NH, one can only dream of flying, again I'm jealous!! Enjoy yourself and I'm sure the "building bug" will bite soon enough.
10-28-2019, 02:43 AM
#1021
Join Date: Jun 2004
Location: M.Pietrasanta (LU) - La Thuile (AO) ITALY
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Good morning to all!
A my friend is looking for the drawing (the build plans) of the Pitts Prometheus,
Do you know where is possible found it?
Thanks a lot!
A my friend is looking for the drawing (the build plans) of the Pitts Prometheus,
Do you know where is possible found it?
Thanks a lot!
