Register

If this is your first visit, please click the Sign Up now button to begin the process of creating your account so you can begin posting on our forums! The Sign Up process will only take up about a minute of two of your time.

Page 1 of 38 12311 ... LastLast
Results 1 to 25 of 928

  1. #1
    Big_Bird's Avatar
    Join Date
    Dec 2001
    Location
    Arlington, TX
    Posts
    4,257
    Gallery
    My Gallery
    Models
    My Models
    Ratings
    My Feedback

    Gary Allen 33% Bücker Jungmeister

    The March 2000 M.A.N. had a construction article on Gary Allen's 1/3 scale Bücker Jungmeister. I ordered the plans and built one. This undoubtably was one of the nicest flying biplanes that I've flown. I had it about a year when a severe mid air turned it into a pile of sticks. I've built 3 giant scale planes since then but have wanted another Jungmeister.

    Arizona Model Aircrafters http://www.arizonamodels.com/ puts out a short kit of this model. I recently bought one and I'm in the process of getting it ready to build. The laser cut parts are very accurate.

    This plane attracted a lot of interest at every big bird flyin that I took it to. It is certainly not a run of the mill giant scale plane. It also qualifies as a warbird because the Germans and Swiss used it as an advanced aerobatic trainer for their Air Force. My first one was done in the German air show team colors. I'm going to do this one in the Swiss Air Force trainer colors. If you have building experience, this plane is pretty straight forward to build. The plans are very good. The flying wires are functional and necessary.

    If there is some interest in this project I will provide construction photos in this thread as I go along. I will also provide hints and address building issues that I see. If you have been looking around for a giant scale plane that is a bit "different" then why not jump in and lets build one together.

    Ken
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Jh15556.jpg 
Views:	115 
Size:	153.6 KB 
ID:	87011   Click image for larger version. 

Name:	Nl29266.jpg 
Views:	150 
Size:	89.5 KB 
ID:	87012  
    Ken
    WACO Brotherhood #70, Arlington TX home of the Dallas Cowboys, SupBowl45, Texas Rangers, World Series 2010, 2011

  2. #2

    Join Date
    Jul 2003
    Location
    coal township, PA
    Posts
    1,483
    Gallery
    My Gallery
    Models
    My Models
    Ratings
    My Feedback

    RE: Gary Allen 33% Bücker Jungmeister

    Hi Big Bird:

    I cannot afford a big one like that yet. But I do have one of the Pica kits I am gonna do some day. Your bird really did look great! I am sorry you lost it in a midair. That woulda made me mad. I would not mind it so much if I boo-boo'd it all by myself. Anyway grat lookin plane lets see photo's along the way. And some of the final product.

    Mark Shuman

  3. #3

    Join Date
    Feb 2002
    Location
    Snow Hill, NC
    Posts
    2,089
    Gallery
    My Gallery
    Models
    My Models
    Ratings
    My Feedback

    RE: Gary Allen 33% Bücker Jungmeister

    Great looking plane. How much to build one for me????????? (I can get the kit)
    The Road Goes on Forever and the Party Never Ends - Robert Earl Keen

  4. #4
    Big_Bird's Avatar
    Join Date
    Dec 2001
    Location
    Arlington, TX
    Posts
    4,257
    Gallery
    My Gallery
    Models
    My Models
    Ratings
    My Feedback

    RE: Gary Allen 33% Bucker Jungmeister

    Mark, you will really enjoy your Pica Jungmeister someday. Anyone who has ever had a Jungmeister knows what a terrific flying bipe it is.

    AJF--2, I wish I could build one for you. It would be the first one that I had ever built for anyone. However, I could never get the creative juices flowing if I were not building it for me.

    I'll post some photos to this thread as I make progress.

    Ken
    Ken
    WACO Brotherhood #70, Arlington TX home of the Dallas Cowboys, SupBowl45, Texas Rangers, World Series 2010, 2011

  5. #5

    Join Date
    Jan 2002
    Location
    henderson, KY
    Posts
    146
    Gallery
    My Gallery
    Models
    My Models
    Ratings
    My Feedback

    RE: Gary Allen 33% Bucker Jungmeister

    Good thread , Ken. I flew Team Scale with Gary Allen with the Jungmeister in 2003 in several meets , and we're campaigning the Jungie again in 2004. Great flying plane , and the plan is accurate to Gary's three view, which three view was redrawn by Gary and ok'd by Dave Platt. Makes for a good contest bird, and is practical for everyday flying. I've found the G62 to be a great engine for this plane. Look forward to the thread.

    Dorin Luck

  6. #6

    Join Date
    Oct 2002
    Location
    Surrey, BC, CANADA
    Posts
    73
    Gallery
    My Gallery
    Models
    My Models
    Ratings
    My Feedback

    RE: Gary Allen 33% Bucker Jungmeister

    I have always been interested in the 1/3 scale Jungmeister and have wondered about the quality of the kits being offered. Although I haven't tried giant scale yet, I shall certainly be following your thread with great interest and appreciation.

  7. #7
    Big_Bird's Avatar
    Join Date
    Dec 2001
    Location
    Arlington, TX
    Posts
    4,257
    Gallery
    My Gallery
    Models
    My Models
    Ratings
    My Feedback

    RE: Gary Allen 33% Bucker Jungmeister

    Dorian, thanks for jumping in here. I used a G62 on the first one but I have a Sachs based 4.2 that I'm going to use on this one. It's about the same weight as the G62. My first one weighed about 30#. I'm trying my best to get this one to come in around 25#. Good luck on the scale circuit this year.

    quietflyer, the quality of this short kit from AMA is very good. Normally this is a scratch built plane from Gary's plans. If you want a high quality kit, get the plans and cut one out. Fortunately the cowl and fenders are available from Arizona Model Aircrafters and are very light and very high quality.

    Ken
    Ken
    WACO Brotherhood #70, Arlington TX home of the Dallas Cowboys, SupBowl45, Texas Rangers, World Series 2010, 2011

  8. #8
    Big_Bird's Avatar
    Join Date
    Dec 2001
    Location
    Arlington, TX
    Posts
    4,257
    Gallery
    My Gallery
    Models
    My Models
    Ratings
    My Feedback

    RE: Gary Allen 33% Bucker Jungmeister

    One mod on the last one that I made and will be carried forward into this one vastly simplifies assembly at the field. In the first photo you will notice the "H" bracket on the end of the wings. Instead of putting the anti rotation dowels on the center section of the wings, I put them on the outboard section. The "H" bracket is slotted where the dowels are so that after sliding the wing assembly onto the plane, the bracket can be slipped off and the wing assembly attached. The reverse takes place when disassembling the wing. After the wing assembly is off the plane 4-40 screws are screwed through the "H" bracket into the outer ribs. As you can see, the interplane struts and flying wires stay in place.

    The second photo shows the results of the severe mid air.

    Ken
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Ca81036.jpg 
Views:	114 
Size:	144.3 KB 
ID:	88013   Click image for larger version. 

Name:	Vt56889.jpg 
Views:	137 
Size:	69.0 KB 
ID:	88014  
    Ken
    WACO Brotherhood #70, Arlington TX home of the Dallas Cowboys, SupBowl45, Texas Rangers, World Series 2010, 2011

  9. #9
    Big_Bird's Avatar
    Join Date
    Dec 2001
    Location
    Arlington, TX
    Posts
    4,257
    Gallery
    My Gallery
    Models
    My Models
    Ratings
    My Feedback

    RE: Gary Allen 33% Bucker Jungmeister

    Here are the first photos of the fuselage. Just getting started good.

    Ken
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Sq47004.jpg 
Views:	172 
Size:	125.3 KB 
ID:	91524   Click image for larger version. 

Name:	Gb90466.jpg 
Views:	171 
Size:	111.9 KB 
ID:	91525  
    Ken
    WACO Brotherhood #70, Arlington TX home of the Dallas Cowboys, SupBowl45, Texas Rangers, World Series 2010, 2011

  10. #10

    Join Date
    Feb 2002
    Location
    Snow Hill, NC
    Posts
    2,089
    Gallery
    My Gallery
    Models
    My Models
    Ratings
    My Feedback

    RE: Gary Allen 33% Bucker Jungmeister

    Sure you won't build one for me??????? Looks good.
    The Road Goes on Forever and the Party Never Ends - Robert Earl Keen

  11. #11

    Join Date
    Jan 2002
    Location
    homeland ca, CA,
    Posts
    1
    Gallery
    My Gallery
    Models
    My Models
    Ratings
    My Feedback

    RE: Gary Allen 33% Bücker Jungmeister

    [img][/img][ul][*] [*] [*]
    [/ul]

  12. #12
    Big_Bird's Avatar
    Join Date
    Dec 2001
    Location
    Arlington, TX
    Posts
    4,257
    Gallery
    My Gallery
    Models
    My Models
    Ratings
    My Feedback

    RE: Gary Allen 33% Bücker Jungmeister

    Here are a few progress photos. All pull pull guide tubes have been installed. Radio installation in fuse is complete. The Sachs 4.2 installation is complete along with cowl installation. I'll build the landing gear next. The fusalage as you see it weighs 7.5 lbs. I'm shooting for 25 lbs or less.

    Gerwin try again. If you want to upload images go to the target to the bottom and left of the reply text box.

    AJF--2 what with building a full scale Spacewalker II and honeydoos, I'm surprised that I've gotten this far with the Jungmeister.

    Ken
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Ki20091.jpg 
Views:	149 
Size:	220.7 KB 
ID:	105707   Click image for larger version. 

Name:	Rp42498.jpg 
Views:	136 
Size:	160.3 KB 
ID:	105708   Click image for larger version. 

Name:	Ig11593.jpg 
Views:	151 
Size:	208.0 KB 
ID:	105709   Click image for larger version. 

Name:	Ig11420.jpg 
Views:	145 
Size:	195.8 KB 
ID:	105710  
    Ken
    WACO Brotherhood #70, Arlington TX home of the Dallas Cowboys, SupBowl45, Texas Rangers, World Series 2010, 2011

  13. #13

    Join Date
    Feb 2002
    Location
    Snow Hill, NC
    Posts
    2,089
    Gallery
    My Gallery
    Models
    My Models
    Ratings
    My Feedback

    RE: Gary Allen 33% Bücker Jungmeister

    I have a local who is trying to sell me the kit he purchased a while back. He knows I love a Jungman/Jungmister ever since the days of my Goldberg. Here is a picture of my Pilot Jungman built by a buddy of mine for me. I see where Gary used a LOT of the Pilot designs in the frame work and wing design. In the bones it looked just like mine. I went overkill with a lot of stuff and on mine it came out way too heavy and overpowered. Still flew great, but since the flying wires are functional they were breaking every flight it got to be a big hassel to re-engineer. Boy what I would give to do it all over again. I will keep following the progress of yours and am looking for some finished pictures soon.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Ay74014.jpg 
Views:	51 
Size:	46.1 KB 
ID:	105860   Click image for larger version. 

Name:	Up47729.jpg 
Views:	41 
Size:	47.9 KB 
ID:	105861   Click image for larger version. 

Name:	Uz68058.jpg 
Views:	36 
Size:	47.9 KB 
ID:	105862  
    The Road Goes on Forever and the Party Never Ends - Robert Earl Keen

  14. #14

    Join Date
    Dec 2001
    Location
    columbus, GA
    Posts
    485
    Gallery
    My Gallery
    Models
    My Models
    Ratings
    My Feedback

    RE: Gary Allen 33% Bücker Jungmeister

    Those poor ARF guys just don't have any idea what they are missing. Beautiful.
    Can\'t never did nothing.

  15. #15
    Big_Bird's Avatar
    Join Date
    Dec 2001
    Location
    Arlington, TX
    Posts
    4,257
    Gallery
    My Gallery
    Models
    My Models
    Ratings
    My Feedback

    RE: Gary Allen 33% Bücker Jungmeister

    That's a very nice looking plane. As I recall though, the Jungman was a two seater. The only Jungmeister that I've seen up close and personal was at a local airshow. It had a flat four type engine.

    Fwman1, I have never had an ARF and I don't have anything against them especially because I think they came along at the right time to save the hobby. That being said, a full 50% of the enjoyment of R/C for me has been building. I really enjoy working with my hands and creating. I've been building models since I was 10 years old and I'm 61 now and retired. People are so busy now that there is no time to build. That is very unfortunate because they are missing a really fun part of the hobby. I predict that within 10 years you may not see a balsa/ply kit on the market.

    Ken
    Ken
    WACO Brotherhood #70, Arlington TX home of the Dallas Cowboys, SupBowl45, Texas Rangers, World Series 2010, 2011

  16. #16
    apalsson's Avatar
    Join Date
    Jun 2003
    Location
    Coffs Harbour NSW, AUSTRALIA
    Posts
    2,299
    Gallery
    My Gallery
    Models
    My Models
    Ratings
    My Feedback

    RE: Gary Allen 33% Bücker Jungmeister

    Hi Ken,

    You Jungmeister is coming along well.
    There is no stopping you once you have started !!

    I wish I had more time to dedicate to building! One day !!!

    I agree - the ARFs came along because of a need in a busy society where everyone is looking for an instant solution. Most hobby shops are already cutting down their selection of kits. It's a shame because modellers miss out on the thrill of creating something and then seeing their own handy work fly.

    Best regards

    Ari

  17. #17
    Big_Bird's Avatar
    Join Date
    Dec 2001
    Location
    Arlington, TX
    Posts
    4,257
    Gallery
    My Gallery
    Models
    My Models
    Ratings
    My Feedback

    RE: Gary Allen 33% Bücker Jungmeister

    Hi Ari, thanks for the comments. I was able to finish building the landing gear this weekend. It and the 6"wheels added 2 1/2 lbs to the model. I don't really know a practical way around this weight gain. I still have to add the filler balsa and ribs to the sides of the gear and add the wheel fenders.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Vt57592.jpg 
Views:	149 
Size:	150.1 KB 
ID:	106431  
    Ken
    WACO Brotherhood #70, Arlington TX home of the Dallas Cowboys, SupBowl45, Texas Rangers, World Series 2010, 2011

  18. #18

    Join Date
    Oct 2002
    Location
    Weymouth, MA
    Posts
    708
    Gallery
    My Gallery
    Models
    My Models
    Ratings
    My Feedback

    RE: It's TOUGH to beat the Jungmeister...!

    Dear Big_Bird:

    The PIPE Here again...and since I've got a scratchbuilt "smallish" one, all of 42 inch wingspan, MYSELF...









    ...dedicated to my LOVE of the popular music from that Scandinavian group of the 1970s, ABBA, I've had some "stick'n'KNOB" time flying my 1/6th scale one back around 1982 through 1984, built from the plan set drawn up by Gordon Whitehead in the January 1982 issue of RCM!

    It IS in need of a WHOLE LOT of work to get IT flying again these days...I DO have a brand new (and ALL broken-in) Saito 30 four stroke for it to fly with...and I've also got a copy (also from RCM) of the plan set for the Dave Platt designed quarter scale Jungmeister, which I'm intending to build starting in the winter of 2004-2005 for Saito 150 power-and IT will get this same "ABBABIPE" color scheme as the small one has-but perhaps with images of Anna, Björn, Benny and Frida (the members of ABBA) on the bigger one, done up as decals with a new Epson color printer I'm hoping to get next fall...even though the Stylus Photo 2200 one that I NEED is a whopping $700!

    That small Jungmeister of mine weighed in at just about 4 lbs, and with only some 450 square inches of wing area that is NOT a plane one can just "horse off" the ground! It DEMANDED to be allowed to take off as IT wanted...just a TOUCH of up elevator after the tail rose off the ground for about a couple of seconds...and after it got skywards with a 'few mistakes' of altitude under its maingear, it was time for some snap rollin', spinnin' and split-Essin' and loopin' FUN!

    I WILL admit it WAS a bit underpowered with the HB 25 two stroke engine it USED to have on its nose...which could ONLY spin about a 9 x 4 prop trying to send thrust past a 5-1/4 inch rear diameter ring cowl...but now, with the Saito 30 available, and with that small Saito four stroke tested at 9500 RPM with a Zinger 11 x 4 prop on my test stand last year, the 11 inch prop gives me a good 75% MORE prop disc area outside the rear cowl's diameter than the small 9 inch prop did, and even though I HAVE to stick with using no HIGHER than a four inch pitch prop in ANY diameter on the plane (any HIGHER pitch on the prop and it comes in as FAST as a cruise MISSLE on landing!) that extra prop disc AREA should make the old small one really "sparkle" when I can finally get the TIME to work on it...perhaps during the worst of the heat and HUMIDITY of this summer up in New England, when I CANNOT fly anyway, I can get SOME work done on it...a lot of OIL SOAKED wood to clean up in ITS structure!

    Now a ONE THIRD scale Jungmeister with, perhaps IF appropriate, a Robart R780 or Seidel ST-770 seven cylinder radial four stroke engine in its nose......now THAT would be a BLAST to have airshow smoke to use with in maneuvers...and it would still be in the ABBABIPE livery, of course...!!!!!!!!!!

    There's some NICE photos of various Bucker aircraft, right from a museum in Germany that specializes in that firm's aircraft at http://www.buecker-museum.de/index.htm ...and of course there's my German Email buddy's webpage at http://www.biplanes.de/home_engl.shtml ...click on the "Airshows" button to see some Bücker aircraft as they look these days, that my buddy got some photos of at airshows near him in Germany...a good number of them!

    SOMEDAY I'll be able to get my small one in the process of oil removal and repair once more...just NOT enough time right now to be able to, though!

    Yours Sincerely,

    The PIPE!
    \"Pipe smoking contributes to a calm and objective judgment in all human affairs\"...Albert Einstein, 1950

  19. #19
    P-51B's Avatar
    Join Date
    Oct 2002
    Location
    An Iceburg in, ANTARCTICA
    Posts
    6,747
    Gallery
    My Gallery
    Models
    My Models
    Ratings
    My Feedback

    RE: Gary Allen 33% Bücker Jungmeister

    ORIGINAL: AJF--2

    I have a local who is trying to sell me the kit he purchased a while back. He knows I love a Jungman/Jungmister ever since the days of my Goldberg. Here is a picture of my Pilot Jungman built by a buddy of mine for me. I see where Gary used a LOT of the Pilot designs in the frame work and wing design. In the bones it looked just like mine. I went overkill with a lot of stuff and on mine it came out way too heavy and overpowered. Still flew great, but since the flying wires are functional they were breaking every flight it got to be a big hassel to re-engineer. Boy what I would give to do it all over again. I will keep following the progress of yours and am looking for some finished pictures soon.
    What changes would you make to the pilot kit? I have one waiting to be built, so I am interested in any improvemants.

  20. #20

    Join Date
    Feb 2002
    Location
    Snow Hill, NC
    Posts
    2,089
    Gallery
    My Gallery
    Models
    My Models
    Ratings
    My Feedback

    RE: Gary Allen 33% Bücker Jungmeister

    The best way is to build it by the plans but put hard reinforced hardpoints everywhere the flying wires attach-- and I would make the wings one piece (I ended up doing this anyway--but I have a trailer, too). At 84" it is not that bad. But most significantly, I would stay with a Moki 1.8 or may 2.1. I did a lot of beefing up the front area to support my Taurus 3.7--then I had to move it out to get the engine past the front of the cowl which meant mounting the servos in the back of the plane for CG purposes and then by the time I added a heavy covering and vinyl graphics and smoke I was in the 25 lb range. Funny part is that it still flew great-I wend deadstick once and with the flat bottom wing it still floated forever-I just had the flying wire issue that I could not get resolved.

    Bottom line--

    1-forget the reinforcment
    2-use a large glow engine--(power is not an issue-this is not a 3D beast)
    3-use Ultracoat for covering
    4-keep it light and you will be suprised at how easy it is to fly

    --also-hey Pipe--let me guess-- the pictures are from the 70s also, right? (Boy I love nostalgia)
    The Road Goes on Forever and the Party Never Ends - Robert Earl Keen

  21. #21
    tonyc's Avatar
    Join Date
    Feb 2002
    Location
    ruston, LA
    Posts
    742
    Gallery
    My Gallery
    Models
    My Models
    Ratings
    My Feedback

    RE: Gary Allen 33% Bücker Jungmeister

    Ken;

    Thanks for the photos. I bought the 1/4 scale version of the plans that you are using. Still haven't started the project yet. I did scratch build an Ultimate and I am just about done with a scratch built Christen Eagle.

    So very soon I will need another bipe to build.

    thans for the building pictrues.

    tonyc

    AJF--2;
    I fly Moki, it sounds to me like I bought the wrong size plans, if you think the Moki will fly the 1/3 scale that well I think I may have to scale up my plans. This isn't a problem, I just hate to buy the wrong size plans and then change them.

  22. #22
    P-51B's Avatar
    Join Date
    Oct 2002
    Location
    An Iceburg in, ANTARCTICA
    Posts
    6,747
    Gallery
    My Gallery
    Models
    My Models
    Ratings
    My Feedback

    RE: Gary Allen 33% Bücker Jungmeister

    ORIGINAL: AJF--2

    The best way is to build it by the plans but put hard reinforced hardpoints everywhere the flying wires attach-- and I would make the wings one piece (I ended up doing this anyway--but I have a trailer, too). At 84" it is not that bad. But most significantly, I would stay with a Moki 1.8 or may 2.1. I did a lot of beefing up the front area to support my Taurus 3.7--then I had to move it out to get the engine past the front of the cowl which meant mounting the servos in the back of the plane for CG purposes and then by the time I added a heavy covering and vinyl graphics and smoke I was in the 25 lb range. Funny part is that it still flew great-I wend deadstick once and with the flat bottom wing it still floated forever-I just had the flying wire issue that I could not get resolved.

    Bottom line--

    1-forget the reinforcment
    2-use a large glow engine--(power is not an issue-this is not a 3D beast)
    3-use Ultracoat for covering
    4-keep it light and you will be suprised at how easy it is to fly

    --also-hey Pipe--let me guess-- the pictures are from the 70s also, right? (Boy I love nostalgia)
    Thanks, I appreciate the advice. Now I just have to find the time to get to the kit!

  23. #23

    Join Date
    Jul 2003
    Location
    coal township, PA
    Posts
    1,483
    Gallery
    My Gallery
    Models
    My Models
    Ratings
    My Feedback

    RE: Gary Allen 33% Bücker Jungmeister

    Hey Pipe, it seems we both have somethings in common. I also love Jugmeisters and certain Scandanavian rock and roll. BTW nice lookin little Jujmeister.

    Mark Shuman

  24. #24
    Big_Bird's Avatar
    Join Date
    Dec 2001
    Location
    Arlington, TX
    Posts
    4,257
    Gallery
    My Gallery
    Models
    My Models
    Ratings
    My Feedback

    RE: Gary Allen 33% Bücker Jungmeister

    More Progress.....

    The first photo shows the method that I used to properly position the upper wing center section prior to building the cabane struts. Make the frame over the plans and the top wing will have the proper -1 degree incidence with respect to 0 incidence on the bottom wing.

    The next photo shows the center wing braces that are on the full scale but not on the plans.

    The next photo shows the muffler outlet. I'll build a dummy engine exhaust that will fit below the cowl.

    The last photo shows the routing of the pull pull red housings. The yellow inner tube will act like a sliding bearing for the Kevlar cable.

    Latest estimate is 28#. What you see here weighs 20#.

    How do you like the night shots? This way the back ground does not look cluttered.

    Ken
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Ca81299.jpg 
Views:	124 
Size:	110.2 KB 
ID:	113643   Click image for larger version. 

Name:	Lj21701.jpg 
Views:	146 
Size:	102.7 KB 
ID:	113644   Click image for larger version. 

Name:	Lj22446.jpg 
Views:	134 
Size:	97.3 KB 
ID:	113645   Click image for larger version. 

Name:	Qn38610.jpg 
Views:	143 
Size:	124.5 KB 
ID:	113646  
    Ken
    WACO Brotherhood #70, Arlington TX home of the Dallas Cowboys, SupBowl45, Texas Rangers, World Series 2010, 2011

  25. #25

    Join Date
    Jun 2003
    Location
    Findlay, OH
    Posts
    62
    Gallery
    My Gallery
    Models
    My Models
    Ratings
    My Feedback

    RE: Gary Allen 33% Bücker Jungmeister

    Ken,
    Thanks again for helping me out on the pics of your plans. For those of you out there that don't know, the Gary Allen Jungmeister 1/4 plans are really messed up! The 1/3 and 1/4 scale plans are very different and the 1/4's are missing the bottom center wing section. M.A.N. is supposed to be fixing them sometime. Anyways, here is a pic of my 1/4 scale Jungmeister.

    Jay
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Om33202.jpg 
Views:	51 
Size:	84.6 KB 
ID:	114345  


Page 1 of 38 12311 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
All times are GMT -6. The time now is 04:29 AM.

SEO by vBSEO 3.6.1 ©2011, Crawlability, Inc.