TMMY Scale Composites 35% scale Cessna
09-23-2014, 12:00 PM
#1751
My Feedback: (28)
Join Date: Apr 2008
Location: , NJ
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
Spidernad. Do you have 4 carb's on your new motor ????. Or 2 ???. Years a go i use to race motocycles. With 4 carbs. This was a honda v-65. At the moto shop u can pick up a carb vaccum guage. It has dials on it . Get your motor running, let it warm up. Depending on the number of carbs, you can sink each carb by the vaccum dial guage. Just a thought. Looking forward too see another viedo.
10-14-2014, 12:18 AM
#1752
Join Date: May 2008
Location: Sydney, AUSTRALIA
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Still waiting for mine 
2 and a half years now
Sergey, did you just get a wing or the whole plane in that time? I'm still wondering why mine is taking so long. Has anyone had a big cessna completed in the last 2 years?
2 and a half years nowSergey, did you just get a wing or the whole plane in that time? I'm still wondering why mine is taking so long. Has anyone had a big cessna completed in the last 2 years?
Last edited by Parrot Girl; 10-14-2014 at 12:21 AM.
10-14-2014, 11:56 AM
#1753
Parrot Girl, I haven't read the whole thread but spot check it at times.......I hope you haven't sent your money in advance. It is a beautiful aircraft and many people would like to have it in their hanger. This kind of service is unacceptable to me....hope it turns out well for you...best wishes, Sebo
10-15-2014, 02:43 AM
#1754
Join Date: Feb 2012
Location: Krasnoyarsk, Siberia, RUSSIA
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
My story is as follows.
In January 2012, I ordered the manufacture of aircraft Tommy.
Paid the entire amount immediately.
In June 2012, the model was ready.
In the autumn of 2013, Tommy wrote to me that, unfortunately, the death of his chief assistant.
Therefore, it will slow down the entire production.
Probably this is the reason of large production time.
The right wing of the second he told me made quickly.
Apparently was blank.
Tommy is a very decent man.
Sincerely, SergeY.
In January 2012, I ordered the manufacture of aircraft Tommy.
Paid the entire amount immediately.
In June 2012, the model was ready.
In the autumn of 2013, Tommy wrote to me that, unfortunately, the death of his chief assistant.
Therefore, it will slow down the entire production.
Probably this is the reason of large production time.
The right wing of the second he told me made quickly.
Apparently was blank.
Tommy is a very decent man.
Sincerely, SergeY.
Last edited by Sergey Alekseev; 10-15-2014 at 02:48 AM.
12-04-2014, 04:18 AM
#1756
It's hard to believe that this thread that I started is over 6 years old and still going strong. I'm happy to see that I have been able to bring everyone a little happiness and fun. It's such a well made plane. Now I need to practice what I preach and buy one myself��.
Saul
Saul
03-17-2015, 11:52 AM
#1762
My Feedback: (28)
Join Date: Apr 2008
Location: , NJ
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
I am considering selling my recently completed 35% TMMY Cessna. It is the only one with a 4-stroke 4-cylinder engine. It also has the radio controlled active yoke system that I designed and built.
I will post some videos below showing the maiden flight, which is the only flight on the plane. It was a great flight and the plane performed excellent.
I have had to focus on my business and don't have time to get to the field.
I would like to see the plane go to a good home where someone can take advantage of all my hard work.
https://www.youtube.com/watch?v=zBhOG_4jJME https://www.youtube.com/watch?v=XladzfX5Gvc
I will post some videos below showing the maiden flight, which is the only flight on the plane. It was a great flight and the plane performed excellent.
I have had to focus on my business and don't have time to get to the field.
I would like to see the plane go to a good home where someone can take advantage of all my hard work.
https://www.youtube.com/watch?v=zBhOG_4jJME https://www.youtube.com/watch?v=XladzfX5Gvc
04-04-2015, 10:57 AM
#1768
My Feedback: (2)
Join Date: Apr 2002
Location: Clifton,
NJ
Posts: 1,859
Likes: 0
Received 0 Likes
on
0 Posts
Hi,
I'm wondering if any present owners can give me info on the brake installation.
This is a pretty old thread and all the sources mentioned for brakes are gone or don't carry them ant more.
Thanks,
Jon
I'm wondering if any present owners can give me info on the brake installation.
This is a pretty old thread and all the sources mentioned for brakes are gone or don't carry them ant more.
Thanks,
Jon
04-04-2015, 10:41 PM
#1774
Member
Join Date: Feb 2008
Location: Pieta, MALTA
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
hi if i am not mistaking Tommy used the ones from Eurokit please use this link http://www.eurokitshop.it/en/147-freni hope it helps you.
