Searching for 100cc Cub Tundra Wheels
Im looking for some Tundra tyres for a 140" Cub. I think they will need to be about 11". Does anyone know where i can find some?
Thanks |
RE: Searching for 100cc Cub Tundra Wheels
Try wheelbarrow inner tubes.
|
RE: Searching for 100cc Cub Tundra Wheels
Good luck man! i've been looking for something to use as tundra tires as well.. it seem that anything bigger than about 6" is impossible to obtain
|
RE: Searching for 100cc Cub Tundra Wheels
I also am looking for them for a 1/4 cub 7x3 inflatable as to keep them mushy.
|
RE: Searching for 100cc Cub Tundra Wheels
ORIGINAL: denoferth Try wheelbarrow inner tubes. |
RE: Searching for 100cc Cub Tundra Wheels
I will have alook into the wheelbarrow tube idea, sounds like it could work. Cub is 14kgs</p> |
RE: Searching for 100cc Cub Tundra Wheels
|
RE: Searching for 100cc Cub Tundra Wheels
I think those would be rather hard, non cushion.
Anything in the RC cars section maybe? |
RE: Searching for 100cc Cub Tundra Wheels
|
RE: Searching for 100cc Cub Tundra Wheels
I know you want bigger. These are for those interested in tundra up to 8".
http://www.topmodelcz.cz/index.php?set_lang_client=2's |
RE: Searching for 100cc Cub Tundra Wheels
Those are about right for a 1/4 scale cub.. to bad no 10" for a 1/3
|
RE: Searching for 100cc Cub Tundra Wheels
I just bought some Du-Bro 7" wheels for now. They will be alot beter than the 4.5" the kit came with.
|
RE: Searching for 100cc Cub Tundra Wheels
google beach stroller tires or beach cart tires. You might find something there. They are large low pressure tubes so you can roll babies and stuff across sand.
edit: I found these: http://www.wheeleez.com/beach-wheels-polyurethane.php they are grey, but some vinyl dye for car interiors should take care of that. |
RE: Searching for 100cc Cub Tundra Wheels
Yah I just picked up a pear of the robart 6"baloonies from my local HS and they are bigger than I thought,they'll be just about what I'm looking for my 1/4 scale cub and I'm thinking of taking the tail wheel off and replaceing it with a skid. the tail wont bounce around as much.snow ski style 3/4" wide.just a thought.
|
RE: Searching for 100cc Cub Tundra Wheels
Check in with Bill Hampel Models, has large size for his Cubs etc.
|
RE: Searching for 100cc Cub Tundra Wheels
My last post said robart 6",NOT,Du-Bro 6"Big wheels is what I was trying to say.sorry guys.Geo.
|
RE: Searching for 100cc Cub Tundra Wheels
I have used a set of the 60% Cub tires on a 40% Hempel Cub. They looked great. Only problem is they tend to split on the seam. I think a little RTV will fix them but for the price they should not do that. I have had 3 sets split. The ones on the 40% and 2 sets on 2 different 60%s. I also have a set of the Wheelez. They are nice and light for their size. Problem is making a bushing to use them plus the hub is about 5" wide making it a huge arm on the axle for heavier aircraft. The Airtops are nice but have to be imported and are a little costly. If money is not an issue get the Airtops, if you want to save some money the Dubros are very nice and available domestically.
|
RE: Searching for 100cc Cub Tundra Wheels
1 Attachment(s)
http://www.northerntool.com/
Low Speed Pneumatic Tire & Wheel — 10in. x 3.00 x 4 These have a nylon hub but require bushings to fit to a 1/4" axle. |
RE: Searching for 100cc Cub Tundra Wheels
1 Attachment(s)
Maybe a couple of these $4.00 tubes, I'm sure you could dream up a hub of some sort and have something very unique and cheap.
|
RE: Searching for 100cc Cub Tundra Wheels
Yeah i think the tube idea will look the best. The soft rubber look looks like the real thing.
|
RE: Searching for 100cc Cub Tundra Wheels
Do a search for the Mud Duck drawings. The large size uses wheelbarrow inner tubes with plywood disks on both sides glued to a wooden dowel for wheels.
|
RE: Searching for 100cc Cub Tundra Wheels
Hey thats it! there's an idea. FYI the tube I pictured was for my pneumatic dolly wheel, the tube is a cheng shin 4" 4.10/3.50 as pictured it measures 9" diameter with just enough air to make it rigid, more air more diameter but I'm sure there's a point where it begins to bulge and loose it's shape. Wish I had a plane big enough to use it on lol i like designing stuff life that.
|
RE: Searching for 100cc Cub Tundra Wheels
I've got some 8" smooth cub wheel with hubs that I got from France. Id be willing to sell.
$80 plus shipping. They were for my 1/4 scale http://i356.photobucket.com/albums/o.../photo18-1.jpg |
All times are GMT -8. The time now is 06:47 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.