Hi all, thanks for you advice. Actually I don´t realy understand why a Hostetler Jungmeister (1/4 scale) fits better to saito radial r3 84cc than a 1/3 Jungmeister from Arizona. Anyway, Arizona told me, that their 1/3 Jungmeister is to small for my engine. So, I am looking for a Jungmeister with 2,4m (95 inches) or somthing similiar. Thanks Volker
|
Check with Gary Allen, Arizona sells his plans as a kit..
You'll get the right answer from him. |
Does anyone Know Ken Spears aka Big_Bird?
I haven't heard from him in a while and I sent him an e-mail and no reply. Starting to get worried about him. Later!! Anthony |
I talked to him a couple years back. Remarried and happy as a guy could be. I'd like to know he is okay too. Lost my email addresses.
Originally Posted by WacoNut
(Post 11978096)
Does anyone Know Ken Spears aka Big_Bird?
I haven't heard from him in a while and I sent him an e-mail and no reply. Starting to get worried about him. Later!! Anthony |
http://www.rcuniverse.com/forum/imag...BJRU5ErkJggg==
Goodnight Gary , recently acquired a plant of its Bucker Jungmeister 33% and will begin construction soon. I'm having trouble finding the balsa wood and plywood list and their respective measures . I can not wait to get it. You can help me with this list ? Thank you very much ... will be the first Bucker its plant in Brazil. Grateful Ricardohttp://www.rcuniverse.com/forum/imag...BJRU5ErkJggg== |
Ricardo.....post 886 is the list. Lots of good information here.Good luck with your build.
Richard Texas, USA |
That would be great! Thanks.
|
Bucker Jungmeister
Hi everyone!
I'm looking for a smaller kit (balsa) - preferably not a short kit - of this beautiful model airplane Bucker Jungmeister. But, it only exists up to 1/6 scale... By any chance, does anyone know where I can buy one? Greetings Walter (Brazil) |
Question,
Has any one here ever got a kit from Arizona Models? They have a 1/3 Allen bucker kit in stoc. I was wondering about the Quality of the kit etc. Years ago they had a bad reputation. But that was a long time ago.. Any feed back would be appreciated. |
So no one has built anything from Arizona Models??
|
I am building the 33% Jungmeister now. It is a very early kit and virtually every piece that was laser cut for the fuse is cut wrong. Some do not match the outlines and others have the wrong size and/ or location notches for the stringers. Wing parts were all pretty good. I understand they improved on later kits. I got my from an individual that never started it. Glass work is decent.
|
P47flyer,
thank you for posting. I guess I could ask Jamie of azm if his kits are correct now. That would make sense. Since you are in Suffolk maybe I'll get to see your finished plane next year at a fly in. I'm up near Fredericksburg. again thank you for the response. |
P47flyer,
Do you think a Moki 180 would fit in the cowl? |
Something I'm curious about. The Allen Jungmeister cowl is too small for a Moki 180 yes? But the Paleo Severin Jungmeister is not. Both are supposedly 1/3 scale.
|
I don't know about he Moki. I'm using a saito 450 on ignition in mine and it fits.
|
OK thank you for the reply. If the 450 fits then then FG 90 should fit too.
|
Arizona model
Originally Posted by BobH
(Post 12389505)
So no one has built anything from Arizona Models??
cant find any info on what the control throws should be. Any help would be appreciated thanks Sam |
Sam,
You mean to say there is no information on the plans about the throws? |
Originally Posted by BobH
(Post 12417784)
Sam,
You mean to say there is no information on the plans about the throws? |
Originally Posted by skotby
(Post 12417810)
not that I can find |
BU133 Throws
Originally Posted by skotby
(Post 12417810)
not that I can find |
Recently purchased the 1/3 scale Gary Allen Jungmeister plans and came across this thread which dates back quite a few years.
Not sure if anyone still watches this thread but was wondering who cuts short kits for this plan? I see that Arizona Models cut kits in the past wondering if the reported issues with the kits have been corrected Saw a post that perhaps Gary Allen is on this site. Does anyone know how to reach him? |
Originally Posted by Going Balistic
(Post 12517786)
Recently purchased the 1/3 scale Gary Allen Jungmeister plans and came across this thread which dates back quite a few years.
Not sure if anyone still watches this thread but was wondering who cuts short kits for this plan? I see that Arizona Models cut kits in the past wondering if the reported issues with the kits have been corrected Saw a post that perhaps Gary Allen is on this site. Does anyone know how to reach him? |
Thanks Todd,
Will do. Rob |
Restarted after 15 years silent
Finally restarted building 1/3 Bucker after hibernating from the hobby for the past 15 years or so. I have the fuse half finished and wings almost done. In the mean time I bought the seagull Bucker to fly and practice on last year. It was so badly built and designed it crashes over 8 times before discovering they had the landing gear moved back 3 inches from where it should have been. Now it flies great and is a real joy to fly l. The engine was also grossly under powered and moved up 20 cc to a 41cc US engine. I discovered several weak areas in the Seagull Bucker that I may be carrying over building the Gary Allen Bucker like the building in of aluminum wing support tubes. This took many hours to accomplish but I saw the benefit in reduced crash damage in the Seagull ARF. Wing tubes seem to be the rage in numerous ARF's these days
https://cimg8.ibsrv.net/gimg/www.rcu...2661fc419e.jpg |
All times are GMT -8. The time now is 01:52 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.