.05 brushless comparable to a 400 brushless
12-05-2012, 08:56 AM
#1
Thread Starter
Join Date: Dec 2005
Location: Victoria,
MN
Posts: 3,934
Likes: 0
Received 0 Likes
on
0 Posts
.05 brushless comparable to a 400 brushless
O.S. .05 Brushless Motor 3805-1200
Is this engine comparable to a 400 park flyer?
I wanted to use a dif. motor other than the following......
Great Planes Rimfire 400 28-30-950 Outrunner
It appears to be larger and heavier.
Great Planes ElectriFly SPAD XIII WWI ARF 34" Calls for the 400 Rimfire outrunner....
Any help would be appreciated...
01-01-2013, 09:26 AM
#2
Senior Member
Join Date: Dec 2002
Location: Chattanooga,
TN
Posts: 2,198
Likes: 0
Received 0 Likes
on
0 Posts
RE: .05 brushless comparable to a 400 brushless
Yes, it is a bit heavier (76g versus 58g) but if the little bit of extra weight doesn't affect the CG (on a bipe you might need extra weight in the nose!) it should be fine. The higher Kv (1200 versus 950) might mean you'd have to use a slightly smaller prop than the 10 x 3.5 recommended.. but maybe not [O.S. specs say 9x6 (3s?)-11x7 (2s?)]
This might be a better choice:
http://www.hobbyking.com/hobbyking/s...or_1000kv.html
This might be a better choice:
http://www.hobbyking.com/hobbyking/s...or_1000kv.html
