Pica Waco 1/6 Conversion
04-03-2015, 06:30 PM
#1
Junior Member
Thread Starter
Join Date: Feb 2004
Location: Daytona Beach,
FL
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Pica Waco 1/6 Conversion
I am converting an old Waco 1/6 Biplane to electric. Just wondering if these specs are ok:
Wing area=990.5, Total weight = 8.125 lbs. (130 oz.)
I think i'd like to go with the following set-up:
AXI 4130/16 with a 16-10 prop. 70amp controller and a 5000mAh 6S (two 3S 50C packs) battery.
Any thoughts or recommendations?
Wing area=990.5, Total weight = 8.125 lbs. (130 oz.)
I think i'd like to go with the following set-up:
AXI 4130/16 with a 16-10 prop. 70amp controller and a 5000mAh 6S (two 3S 50C packs) battery.
Any thoughts or recommendations?
