Sig Kobra Conversion??
#1
Senior Member
Thread Starter
My Feedback: (1)
Join Date: Jun 2002
Location: Paramus,
NJ
Posts: 486
Likes: 0
Received 0 Likes
on
0 Posts
Sig Kobra Conversion??
Hi All
I'm in the process of building the Sig Kobra.. I would like to convert it into an electric plane..I've been getting some power system information on E Zone..I was just wondering what you guys would recomend..
I do have 2 E-planes under my belt,both were kits designed for E flight.The Kobra will my first conversion.
Here are Sigs Spec: weight 41oz/WS 45"/Wing Area 390sq. in./Wing Loading 19oz/sq.ft...The plane was designed for a 19-32 c. in. 2 stroke.
I've been looking lately at the Hyperion Motor 3019/10 and the 3025's..Here's the link..http://www.allerc.com/z3019spec.htm.
I've also looked at the AXI 2820's and 2826's plus the Hacker's a30's..
Please when you get a chance let me know what you think.. I'm not into 3D or need a rocket ship.
Thanks Dan
I'm in the process of building the Sig Kobra.. I would like to convert it into an electric plane..I've been getting some power system information on E Zone..I was just wondering what you guys would recomend..
I do have 2 E-planes under my belt,both were kits designed for E flight.The Kobra will my first conversion.
Here are Sigs Spec: weight 41oz/WS 45"/Wing Area 390sq. in./Wing Loading 19oz/sq.ft...The plane was designed for a 19-32 c. in. 2 stroke.
I've been looking lately at the Hyperion Motor 3019/10 and the 3025's..Here's the link..http://www.allerc.com/z3019spec.htm.
I've also looked at the AXI 2820's and 2826's plus the Hacker's a30's..
Please when you get a chance let me know what you think.. I'm not into 3D or need a rocket ship.
Thanks Dan
#3
Junior Member
Join Date: Aug 2005
Location: , SK, CANADA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
RE: Sig Kobra Conversion??
Hi, you are probably on to another plane by now, thought I would add some thoughts. Did a conversion of my Kobra last year, it was a 30 os max flew great but I sold all my gas and only fly electric now, here is the set-up. AXI 2820-10 using TP 6 lipo-2100's, castle c. 45
foam wheels.Weighs in at 3.25 lbs. I lengthened the nose 2.5 inches for better balance and now looks more "F-5" like, really has good power with a 10-7 prop and full charge. 8 min flights, smooth landings, now if I only had retracts!
COBRA7
foam wheels.Weighs in at 3.25 lbs. I lengthened the nose 2.5 inches for better balance and now looks more "F-5" like, really has good power with a 10-7 prop and full charge. 8 min flights, smooth landings, now if I only had retracts!
COBRA7
#4
Senior Member
Thread Starter
My Feedback: (1)
Join Date: Jun 2002
Location: Paramus,
NJ
Posts: 486
Likes: 0
Received 0 Likes
on
0 Posts
RE: Sig Kobra Conversion??
Hi Cobra7 I'm still working on the Kobra..I'm into the covering stages right now..This is my 3rd E plane.. My power system for the Kobra, Hyperion Z3025/08,Titan 50bec/ESC,Hyperion 3s2p4200, with a APC e prop 10x7 getting 430 watts at WOT, with a 10x5 350 watts at WOT.
My Kobra weight was a little over 3 pounds before covering..Did you use a TP 3s2p4200 for your battery??Also made my Kobra into a tail dragger..
My Kobra weight was a little over 3 pounds before covering..Did you use a TP 3s2p4200 for your battery??Also made my Kobra into a tail dragger..