Kangke F3A electric.
04-03-2004, 03:30 PM
#1
Junior Member
Thread Starter
Join Date: Apr 2004
Location: Belgium, BELGIUM
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Kangke F3A electric.
Hi,
I bought a kangke F3A plane some time ago and sinds the Dortmund fair is comming.
It schould not be long to get it in the air.
It a fully epoxy model.
wingspan:61,8" (1570 mm)
Length:60" (1524 mm)
wing area:870sq. in (56,20 sq. dm)
Flying weight: 3938g(whit the 18 cell kontronik setup)
Model weight: 2480g
would a Kontronik Fun 600-18 (12V) on 18x3300 whit a 5:1 gear and a 17x9 prop be able to hover the plane.
And at what flying time am I'm looking.
Or at what other motor would do this,would like to stay whit a 18 cells setup iff it is possible.
If possible I would like to stay whit a flight time +/- 4 min full trottle,whit NIMH or NICD.
THANK YOU VERY MUCH[8D]
PS sorry about the bad pics
I bought a kangke F3A plane some time ago and sinds the Dortmund fair is comming.
It schould not be long to get it in the air.
It a fully epoxy model.
wingspan:61,8" (1570 mm)
Length:60" (1524 mm)
wing area:870sq. in (56,20 sq. dm)
Flying weight: 3938g(whit the 18 cell kontronik setup)
Model weight: 2480g
would a Kontronik Fun 600-18 (12V) on 18x3300 whit a 5:1 gear and a 17x9 prop be able to hover the plane.
And at what flying time am I'm looking.
Or at what other motor would do this,would like to stay whit a 18 cells setup iff it is possible.
If possible I would like to stay whit a flight time +/- 4 min full trottle,whit NIMH or NICD.
THANK YOU VERY MUCH[8D]
PS sorry about the bad pics
