Jack Stafford Models L 19 Conversion
#1
Senior Member
Thread Starter
My Feedback: (7)
Join Date: Jun 2002
Location: Seymour,
IN
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
Jack Stafford Models L 19 Conversion
I am framing up a Jack Stafford Models L 19 that I would like to convert to electric. My experience with electric is limited to a Shockflyer. So, I need your advice on what brushless motor, esc and Lypo pack to use. The plane has a 72" wingspan with 714" of wing area and should weigh in no more than 8 pounds. This is a nice kit that frames up quickly, you can check it out at www.jsmodels.com so please let me know your thoughts.
#2
Senior Member
RE: Jack Stafford Models L 19 Conversion
You should easily be able to fly the "Birddog" with a setup like I used on my Hangar 9 Corsair or Skylark.
[ul][*] AXI 4130/16[*] Jeti 77-amp Opto ESC[*] APC 15x8 e-prop[*] 6s Lithium pack that can deliver 40-amps continuous
[/ul]
Good luck!
[ul][*] AXI 4130/16[*] Jeti 77-amp Opto ESC[*] APC 15x8 e-prop[*] 6s Lithium pack that can deliver 40-amps continuous
[/ul]
Good luck!