Herr Pitts Special
05-25-2004, 05:36 AM
#1
Senior Member
Thread Starter
Join Date: Dec 2001
Location: Queensland, AUSTRALIA
Posts: 525
Likes: 0
Received 0 Likes
on
0 Posts
Herr Pitts Special
I`ve never been in here before so maybe this has already been queried? I have a Herr Pitts Special kit gathering dust here and a lightly used OS 10 FSR earmarked to power it.
Before I get to start on this project, it occurs to me that it might be a good candidate for electric power. My experience in electrics to date is pretty light, I have bult a couple of O/D Speed 400 models with gear reduction drives that went OK, but figure this may want a little more power.
Has anyone electrified this before, and if so what motor, batteries etc are recommended?
Thanks in advance.
Alan W
Before I get to start on this project, it occurs to me that it might be a good candidate for electric power. My experience in electrics to date is pretty light, I have bult a couple of O/D Speed 400 models with gear reduction drives that went OK, but figure this may want a little more power.
Has anyone electrified this before, and if so what motor, batteries etc are recommended?
Thanks in advance.
Alan W
06-12-2004, 05:59 PM
#2
Senior Member
My Feedback: (2)
Join Date: Aug 2002
Location: Jacksonville,
FL
Posts: 504
Likes: 0
Received 0 Likes
on
0 Posts
RE: Herr Pitts Special
Several threads about the Pitts conversion on RCGroups:
[link]http://www.rcgroups.com/forums/showthread.php?t=170490&page=1&pp=15&highlight=Herr+Pitts[/link]
Rick
[link]http://www.rcgroups.com/forums/showthread.php?t=170490&page=1&pp=15&highlight=Herr+Pitts[/link]
Rick
