Freedom 20
06-21-2003, 12:32 AM
#1
Freedom 20
Had a Goldberg Freedom 20 54 inch span. I made it a tail-dragger as shown. Replaced the lite-ply in the fuse with 1/8 balsa.
Covered in Econokote. Power is an inexpensive 550 wattage can motor with an old belt drive. New 2600 mh NiMH 8 cell pack gives me 12 to 15 min depending on throttle setting.
Covered in Econokote. Power is an inexpensive 550 wattage can motor with an old belt drive. New 2600 mh NiMH 8 cell pack gives me 12 to 15 min depending on throttle setting.
