Enya .45CX bolts
04-12-2011, 07:06 PM
#1
Junior Member
Thread Starter
Join Date: Dec 2002
Location: Cazenovia,
NY
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Enya .45CX bolts
This engine was given to me (used) and I am in the midst of tearing it down and cleaning it up. I want to replace the muffler screws and the carb screws as some of the heads are mangled. Any info on the correct muffler and carbs screws would be greatly appreciated.
04-12-2011, 10:48 PM
#2
Senior Member
Join Date: Jul 2004
Location: Dubbo, New South Wales, AUSTRALIA
Posts: 1,484
Likes: 0
Received 0 Likes
on
0 Posts
RE: Enya .45CX bolts
G'day
I recently overhauled an Enya 45-CX and I bought some bolts and a set of bearings from Ken Enya at www.enya-engine.com/index_E.htm. He replied quickly to my emails and the parts were quite cheap and arrived quickly. Sadly, he does not have any piston and liner sets. Mine is good but not great.
Cheers
Mike in Oz
I recently overhauled an Enya 45-CX and I bought some bolts and a set of bearings from Ken Enya at www.enya-engine.com/index_E.htm. He replied quickly to my emails and the parts were quite cheap and arrived quickly. Sadly, he does not have any piston and liner sets. Mine is good but not great.
Cheers
Mike in Oz
