Sabres
#1
Thread Starter
Join Date: Jul 2006
Location: Sydney, AUSTRALIA
Posts: 530
Likes: 0
Received 0 Likes
on
0 Posts
Sabres
Quite a while ago I got a Sabre 19, looked to be low use.
When I first attempted to give it a run, the head gasket had left the building. Original was one of those old composite material jobs. Not being able to source the original material, I used some oil gasket material from the local Auto shop.
I gave it a run today . I'm very pleased with the ease of starting, and the general handling.
Now of course the question is what to build for it. I'm leaning towards a Baby Bird. An Australian design of a smaller TBird.
Other suggestions welcome - Must be CL.
Thanks
Greg
When I first attempted to give it a run, the head gasket had left the building. Original was one of those old composite material jobs. Not being able to source the original material, I used some oil gasket material from the local Auto shop.
I gave it a run today . I'm very pleased with the ease of starting, and the general handling.
Now of course the question is what to build for it. I'm leaning towards a Baby Bird. An Australian design of a smaller TBird.
Other suggestions welcome - Must be CL.
Thanks
Greg