jeffie8696

What is everybody using for props on their Saito 1.00? Mine seems to want to rev and flys my Escapade with a 13X7 JXF really well but getting off the runway could be improved and its turning 10,400 which is a little over my comfort zone. I tried a Master Airscrew 13X8 K series (one of my favorite style props) and it gets off the ground better but I like the way the plane flew more with the 13X7. I have a lot of experimenting to do.

airraptor

My Feedback: (66)

10,400 isnt that high. I have turned mine 91-125s over 11,000 on the ground no issues in the air. I would try a APC 13x9 a APC 14x7 and some 35% nitro

Hobbsy

My Feedback: (102)

I run a Xoar 15x6 on mine @ 9,950.

jaka

Hi!
I would try a 15x6 or 14x7 APC or 16x4 if it's a slow flying 3D or high wing plane

jeffie8696

I think the 14X7 is going to be the size but I dont have one in inventory right now to test. I like to keep my pitch at 7 or 8 with my four strokes to keep the speed up since they operate at slightly lower rpm than my two strokes

airraptor

My Feedback: (66)

you would like the 13x9 APC