Wanted Parts for a Super Tiger 56
#1
Thread Starter
Join Date: Jan 2010
Location: Red Lake Falls,
MN
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Wanted Parts for a Super Tiger 56
Part # 22020562 Carb Body O Ring
Part # 22080212 Carb Retainer
P
art # 22110247 Carb Retainer Nut
Super Tiger G 51 not a G56
Part # 22080212 Carb Retainer
P
art # 22110247 Carb Retainer Nut
Super Tiger G 51 not a G56
Last edited by wlavigne; 06-23-2017 at 06:29 PM.
#6
I have a drawbar from another engine. Let me see if it fits my GS45. I believe the .45 and .51 use the same carb drawbar. As for the carb base o-ring - go to a local hardware store with the carb in hand. Find an o-ring that is just a tiny bit smaller diameter than the neck of the carb. OR a you could put a thin bead of sensor safe RTV silicone around the base of the carb.
#8
Thread Starter
Join Date: Jan 2010
Location: Red Lake Falls,
MN
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
This engine is put on my Great Planes Escapade that I put together this last winter. The first engine was a OS 70 Surpass II but it would stall out all the time. So I had the Tiger 51 put on and found the carb would turn. The retainer nut was bad so I was going to replace O ring and retainer and nut. I have the carb tight now so maybe it will ok. I been waiting for good weather but none yet. All it's been is windy days. To much to madien. Been working on a Big Stick now. Will be running a Irvin .46 in it,