Glow Engines Discuss RC glow engines

Welcome to Club SAITO !

Reply

Old 03-15-2019, 08:05 AM
  #39401  
Hobbsy
My Feedback: (101)
 
Hobbsy's Avatar
 
Join Date: Dec 2001
Location: Colonial Beach, VA
Posts: 18,799
Gallery
My Gallery
Models
My Models
Ratings
My Feedback
Default



At 6,000 rpm


At half tank point


Great tool, just bolt onto an old case with aluminum foil sandwiched under it and cut away.
It bothered me having two paper gaskets under the cam cover, so made myself a tool called Happy Harry's Handy Dandy Cam Cover Gasket Cutout Guide. It worked perfectly. I cut a gasket out of aluminum foil to replace one of the paper ones. By the time the 14 oz tank was finished the tach was reading 10,770, I went to take a picture of the new tach numbers and my numb thumb and fingers popped the tach right into the prop. Tach is dead, prop unharmed. I got the 10.440 rpm reading about where the tank level is in these pictures. I'll be back

Last edited by Hobbsy; 03-15-2019 at 08:47 AM. Reason: Finishing post
Hobbsy is online now  
Reply With Quote
Old 03-15-2019, 08:52 AM
  #39402  
acdii
 
Join Date: Jan 2011
Location: Capron, IL
Posts: 7,575
Gallery
My Gallery
Models
My Models
Ratings
My Feedback
Default

I've flown my LT-40 on an OS 52 and now an FG-11. They fly about the same, but the FG-11 has a longer flight time.
acdii is offline  
Reply With Quote
Old 03-15-2019, 08:58 AM
  #39403  
Hobbsy
My Feedback: (101)
 
Hobbsy's Avatar
 
Join Date: Dec 2001
Location: Colonial Beach, VA
Posts: 18,799
Gallery
My Gallery
Models
My Models
Ratings
My Feedback
Default

Do you run a 13 x 6 on the FG 11, Thanks
Hobbsy is online now  
Reply With Quote
Old 03-15-2019, 09:04 AM
  #39404  
Hobbsy
My Feedback: (101)
 
Hobbsy's Avatar
 
Join Date: Dec 2001
Location: Colonial Beach, VA
Posts: 18,799
Gallery
My Gallery
Models
My Models
Ratings
My Feedback
Default

In the above engine run I left out the prop size.

Saito 50 GK, new Boca Bearings, new gaskets, modern Revised Saito muffler
Prop===Graupner G-Sonic 12 x 6
Plug===OS-f
Fuel===Wildcat 10% with 18% full syn.
Max rpm after 14 oz of fuel burn==10,770
Idle 2,100

It took 45 minutes to empty the tank. Great engine.
Hobbsy is online now  
Reply With Quote
Old 03-15-2019, 09:14 AM
  #39405  
the Wasp
My Feedback: (1)
 
Join Date: Sep 2003
Location: VT
Posts: 3,249
Gallery
My Gallery
Models
My Models
Ratings
My Feedback
Default

Originally Posted by Hobbsy View Post
In the above engine run I left out the prop size.

Saito 50 GK, new Boca Bearings, new gaskets, modern Revised Saito muffler
Prop===Graupner G-Sonic 12 x 6
Plug===OS-f
Fuel===Wildcat 10% with 18% full syn.
Max rpm after 14 oz of fuel burn==10,770
Idle 2,100
It took 45 minutes to empty the tank. Great engine.
LOL Dave, that number "10,770" is 500 RPM higher than my OS 61Fx did on 20% Nitro with an APC 12X6

way to go Saito

Jim
Saito Engines, if you go to buy an OS 2 stroke and there is a Saito setting there, well then you have no choices , you buy the Saito
the Wasp is offline  
Reply With Quote
Old 03-15-2019, 09:37 AM
  #39406  
the Wasp
My Feedback: (1)
 
Join Date: Sep 2003
Location: VT
Posts: 3,249
Gallery
My Gallery
Models
My Models
Ratings
My Feedback
Default

Dave, I remember you used a different Cams in the 130 you got from me,, so I looked it up, Garry is correct, the FA50, 100T and 130T all use the same Cam "SAI5035" and "SAI130T34" "stock",, you put the updated Cam (s) in the 130, LOL that means your 130 will produce more power than stock,, LOL it also means I could put those cams in my 100T,, but I really have no need to do that, it's big enough engine for my 4 Star 60

Jim
the Wasp is offline  
Reply With Quote
Old 03-15-2019, 09:55 AM
  #39407  
Captcrunch44
 
Join Date: Aug 2007
Location: dysart, IA
Posts: 849
Gallery
My Gallery
Models
My Models
Ratings
My Feedback
Default


Rudolph
here’s a pic for you Astro Hog and Saito 72 sorry not a GK
Captcrunch44 is online now  
Reply With Quote
Old 03-15-2019, 10:55 AM
  #39408  
FlyerInOKC
My Feedback: (6)
 
FlyerInOKC's Avatar
 
Join Date: Nov 2004
Location: Oklahoma City, OK
Posts: 9,455
Gallery
My Gallery
Models
My Models
Ratings
My Feedback
Default

I think you should have used Kermit the frog as a pilot!
FlyerInOKC is offline  
Reply With Quote
Old 03-15-2019, 11:39 AM
  #39409  
Glowgeek
 
Join Date: Feb 2016
Posts: 226
Gallery
My Gallery
Models
My Models
Ratings
My Feedback
Default

Originally Posted by Hobbsy View Post
In the above engine run I left out the prop size.

Saito 50 GK, new Boca Bearings, new gaskets, modern Revised Saito muffler
Prop===Graupner G-Sonic 12 x 6
Plug===OS-f
Fuel===Wildcat 10% with 18% full syn.
Max rpm after 14 oz of fuel burn==10,770
Idle 2,100
.
Tach it with an APC 12x6 Dave. I'm interested in those G-Sonic props.
Glowgeek is online now  
Reply With Quote
Old 03-15-2019, 11:42 AM
  #39410  
acdii
 
Join Date: Jan 2011
Location: Capron, IL
Posts: 7,575
Gallery
My Gallery
Models
My Models
Ratings
My Feedback
Default

Originally Posted by Hobbsy View Post
Do you run a 13 x 6 on the FG 11, Thanks
Yep, I sure do.
acdii is offline  
Reply With Quote
Old 03-15-2019, 12:35 PM
  #39411  
Jesse Open
 
Jesse Open's Avatar
 
Join Date: Mar 2018
Location: Just North of Canadian border
Posts: 858
Gallery
My Gallery
Models
My Models
Ratings
My Feedback
Default

Originally Posted by the Wasp View Post
Dave, I remember you used a different Cams in the 130 you got from me,, so I looked it up, Garry is correct, the FA50, 100T and 130T all use the same Cam "SAI5035" and "SAI130T34" "stock",, you put the updated Cam (s) in the 130, LOL that means your 130 will produce more power than stock,, LOL it also means I could put those cams in my 100T,, but I really have no need to do that, it's big enough engine for my 4 Star 60

Jim
Thank you Jim.

Too freakin funny.. ... ....
Jesse Open is online now  
Reply With Quote
Old 03-15-2019, 12:42 PM
  #39412  
Glowgeek
 
Join Date: Feb 2016
Posts: 226
Gallery
My Gallery
Models
My Models
Ratings
My Feedback
Default

Gary, if a fella wanted to have some custon tappets made for a saito what type of steel would he use? What hardeness would he shoot for?
Glowgeek is online now  
Reply With Quote
Old 03-15-2019, 12:42 PM
  #39413  
Hobbsy
My Feedback: (101)
 
Hobbsy's Avatar
 
Join Date: Dec 2001
Location: Colonial Beach, VA
Posts: 18,799
Gallery
My Gallery
Models
My Models
Ratings
My Feedback
Default

Thanks AC, Glowy, I don't think I own an APC 12 x 6, I'll look though.

Jim, I'll have to search my pictures for some of the 130 stuff

Pet, I just ran the Saito 56 I rebuilt the G-Sonic made that high frequency bee buzz you talk about, it occured at 11,760 rpm

Saito 56 GK, newer model with front vent
Prop=== Graupner G-Sonic 12 x 6.
Plug====Taipan 4c Special
Fuel====Wildcat 10% with 18% full syn.
Muffler==Cast revised muffler
Max rpm after 30 minute refresher 11,760
Idle 2,100
Hobbsy is online now  
Reply With Quote
Old 03-15-2019, 12:53 PM
  #39414  
Glowgeek
 
Join Date: Feb 2016
Posts: 226
Gallery
My Gallery
Models
My Models
Ratings
My Feedback
Default

Originally Posted by Hobbsy View Post
Thanks AC, Glowy, I don't think I own an APC 12 x 6, I'll look though.

Jim, I'll have to search my pictures for some of the 130 stuff

Pet, I just ran the Saito 56 I rebuilt the G-Sonic made that high frequency bee buzz you talk about, it occured at 11,760 rpm

Saito 56 GK, newer model with front vent
Prop=== Graupner G-Sonic 12 x 6.
Plug====Taipan 4c Special
Fuel====Wildcat 10% with 18% full syn.
Muffler==Cast revised muffler
Max rpm after 30 minute refresher 11,760
Idle 2,100
You sure that's not an 11x6 prop? If it is a 12x6 it ain't doing much work!
Glowgeek is online now  
Reply With Quote
Old 03-15-2019, 01:00 PM
  #39415  
Hobbsy
My Feedback: (101)
 
Hobbsy's Avatar
 
Join Date: Dec 2001
Location: Colonial Beach, VA
Posts: 18,799
Gallery
My Gallery
Models
My Models
Ratings
My Feedback
Default

Nope, I double checked that, I just ordered two APC 12 x 6's and a new digital tach.

That logic doesn't make sense, for years all I've heard is how APC's are the best because they turn higher rpm. Y'all are going to have to straighten me out on that, maybe I'm behind the times.

Last edited by Hobbsy; 03-15-2019 at 01:12 PM.
Hobbsy is online now  
Reply With Quote
Old 03-15-2019, 02:07 PM
  #39416  
the Wasp
My Feedback: (1)
 
Join Date: Sep 2003
Location: VT
Posts: 3,249
Gallery
My Gallery
Models
My Models
Ratings
My Feedback
Default

'
Originally Posted by Hobbsy View Post
Nope, I double checked that, I just ordered two APC 12 x 6's and a new digital tach.

That logic doesn't make sense, for years all I've heard is how APC's are the best because they turn higher rpm. Y'all are going to have to straighten me out on that, maybe I'm behind the times.
I am with you Dave !! I don't believe a given brand prop is the best just because they rev higher.. but maybe they were made that way so people would think that

but Dave, I wish you would tell us why you do not like them, LOL we can take it, I will most likely agree with you on your points anyway

Jim
the Wasp is offline  
Reply With Quote
Old 03-15-2019, 02:08 PM
  #39417  
Glowgeek
 
Join Date: Feb 2016
Posts: 226
Gallery
My Gallery
Models
My Models
Ratings
My Feedback
Default

Originally Posted by Hobbsy View Post
Nope, I double checked that, I just ordered two APC 12 x 6's and a new digital tach.

That logic doesn't make sense, for years all I've heard is how APC's are the best because they turn higher rpm. Y'all are going to have to straighten me out on that, maybe I'm behind the times.
Well I'm not prop expert by any stretch. My static thrust calculator shows apc props as having the highest CF (effectiveness coefficient) and therefore calculates that they take more hp to spin at any given rpm than the rest of the prop selections in the program.

This I know for sure: MAS classic props spin faster and xoar props spin slower than apc props on all of my engines. MAS K are about the same rpm as apc. The only other props I've tried were antique TF and the newer Vess but have no direct comparison to other props of the same size.

I've heard the buzzing noise is caused by stalling at the prop tips but not sure about that. Even my apc props will make that buzz if it's windy out at my test bench and also when I'm doing crazy flip flop aerobatics.

Last edited by Glowgeek; 03-15-2019 at 02:13 PM.
Glowgeek is online now  
Reply With Quote
Old 03-15-2019, 03:11 PM
  #39418  
Hobbsy
My Feedback: (101)
 
Hobbsy's Avatar
 
Join Date: Dec 2001
Location: Colonial Beach, VA
Posts: 18,799
Gallery
My Gallery
Models
My Models
Ratings
My Feedback
Default

Originally Posted by the Wasp View Post
'

I am with you Dave !! I don't believe a given brand prop is the best just because they rev higher.. but maybe they were made that way so people would think that

but Dave, I wish you would tell us why you do not like them, LOL we can take it, I will most likely agree with you on your points anyway

Jim
Actually I don't have anything against them, although a few years ago I got some that had the holes drilled at an angle. The bottom line is I started using the gray Graupners when the old Hobby-Lobby sold. Jim Thompson's (the owner) son was married to Herr Graupners daughter. At one time I knew every combination of Graupner, engine and plane that worked well together.

The G-sonics sure do make a lot of wind but I know that's not the whole story. Maybe by Tuesday I'll have the new tach and the 12 x 6 APC's. I have a Turnigy tach but I can't get it to measure glow speeds, it either wants to measure 100,000 rpm or 1,000 rpm rotor speeds.
Hobbsy is online now  
Reply With Quote
Old 03-15-2019, 03:21 PM
  #39419  
Hobbsy
My Feedback: (101)
 
Hobbsy's Avatar
 
Join Date: Dec 2001
Location: Colonial Beach, VA
Posts: 18,799
Gallery
My Gallery
Models
My Models
Ratings
My Feedback
Default



Note different pin heighth
Jim, I think what was alluded to earlier was this picture of a 130 cam housing and a 65 cam housing, when I installed the left housing the cam did not turn because the gears weren't meshed. Sitll don't understand that one.
Hobbsy is online now  
Reply With Quote
Old 03-15-2019, 03:46 PM
  #39420  
Hobbsy
My Feedback: (101)
 
Hobbsy's Avatar
 
Join Date: Dec 2001
Location: Colonial Beach, VA
Posts: 18,799
Gallery
My Gallery
Models
My Models
Ratings
My Feedback
Default

OK these are the numbers I got on a plain Jane 56 NIB back in 10/2018

Saito 56 plain
Fuel Wildcat=========10% with 18% full syn.
Plug===============OS-f
Exhaust============Stock/revised muffler
Prop==============Graupner G-Sonic 12 x 6
Max rpm===========10,970 rpm
Idle===============-1,810 rpm
Hobbsy is online now  
Reply With Quote
Old 03-15-2019, 04:45 PM
  #39421  
the Wasp
My Feedback: (1)
 
Join Date: Sep 2003
Location: VT
Posts: 3,249
Gallery
My Gallery
Models
My Models
Ratings
My Feedback
Default

Originally Posted by Hobbsy View Post
Actually I don't have anything against them, although a few years ago I got some that had the holes drilled at an angle. The bottom line is I started using the gray Graupners when the old Hobby-Lobby sold. Jim Thompson's (the owner) son was married to Herr Graupners daughter. At one time I knew every combination of Graupner, engine and plane that worked well together.

The G-sonics sure do make a lot of wind but I know that's not the whole story. Maybe by Tuesday I'll have the new tach and the 12 x 6 APC's. I have a Turnigy tach but I can't get it to measure glow speeds, it either wants to measure 100,000 rpm or 1,000 rpm rotor speeds.
Dave, I hope you didn't throw those props out, those props are for planes that need a lot of thrust angle

(Jim snickering)
the Wasp is offline  
Reply With Quote
Old 03-15-2019, 04:53 PM
  #39422  
Jesse Open
 
Jesse Open's Avatar
 
Join Date: Mar 2018
Location: Just North of Canadian border
Posts: 858
Gallery
My Gallery
Models
My Models
Ratings
My Feedback
Default

Measurements beat eyeball every time
Jesse Open is online now  
Reply With Quote
Old 03-15-2019, 06:24 PM
  #39423  
Jesse Open
 
Jesse Open's Avatar
 
Join Date: Mar 2018
Location: Just North of Canadian border
Posts: 858
Gallery
My Gallery
Models
My Models
Ratings
My Feedback
Default

Originally Posted by the Wasp View Post
Dave, I hope you didn't throw those props out, those props are for planes that need a lot of thrust angle

(Jim snickering)

Jim

When I was a kid there was a ham radio op in the neighborhood who saved all his junk for me.

Maybe Dave could just bag up all those useless props and other such stuff and send you a CARE package now and then.

If you ever know someone coming this way I can send back a case or two of that fuel we talked about
Jesse Open is online now  
Reply With Quote
Old 03-15-2019, 06:44 PM
  #39424  
the Wasp
My Feedback: (1)
 
Join Date: Sep 2003
Location: VT
Posts: 3,249
Gallery
My Gallery
Models
My Models
Ratings
My Feedback
Default

Originally Posted by Jesse Open View Post



Jim

When I was a kid there was a ham radio op in the neighborhood who saved all his junk for me.

Maybe Dave could just bag up all those useless props and other such stuff and send you a CARE package now and then.

If you ever know someone coming this way I can send back a case or two of that fuel we talked about
you guys are the best !! I feel I owe you both!!

Jim
the Wasp is offline  
Reply With Quote
Old 03-15-2019, 10:45 PM
  #39425  
Rudolph Hart
 
Rudolph Hart's Avatar
 
Join Date: Apr 2008
Location: Perth, AUSTRALIA
Posts: 4,153
Gallery
My Gallery
Models
My Models
Ratings
My Feedback
Default

Originally Posted by Glowgeek View Post
Well I'm not prop expert by any stretch. My static thrust calculator shows apc props as having the highest CF (effectiveness coefficient) and therefore calculates that they take more hp to spin at any given rpm than the rest of the prop selections in the program.

This I know for sure: MAS classic props spin faster and xoar props spin slower than apc props on all of my engines. MAS K are about the same rpm as apc. The only other props I've tried were antique TF and the newer Vess but have no direct comparison to other props of the same size.

I've heard the buzzing noise is caused by stalling at the prop tips but not sure about that. Even my apc props will make that buzz if it's windy out at my test bench and also when I'm doing crazy flip flop aerobatics.
Best i can describe the sound is it's like quickly ripping a silk double bed sheet in half but that's another story.

ps still don't explain why a mas 15x8 briefly sounds like a sonic boom in a full throttle dive on the midget.
Rudolph Hart is offline  
Reply With Quote

Thread Tools
Search this Thread

Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service