Welcome to Club SAITO !
Dave even trev uses an apc to compare prop figures so they mean something to the vast majority of us all and here's me feeling guilty cause i caned my 30 to silly figures.
My Feedback: (10)
hi can anyone here at the satio club help me ,
i dont see the Saito FG-17 (100) 4-Stroke Gas Engine for sale at chief aircraft or horzion hobby has this engine been discontinued
i dont see the Saito FG-17 (100) 4-Stroke Gas Engine for sale at chief aircraft or horzion hobby has this engine been discontinued
My Feedback: (6)
Enough already , what is it kick the pope day or something ? If you must know when the pope was born he was so ugly he slapped himself in the face . Even Tele has had a shot , he's finaly lowered himself to my level . He must have a sense of humor after all . Who knows one day we might become friends ! cheers the pope
Senior Member
Join Date: Apr 2010
Location: Cairns, AUSTRALIA
Posts: 1,053
Likes: 0
Received 0 Likes
on
0 Posts
Dave, the 65 was supposed to be good for 10K RPM on FAI fuel when it was new. Told my mate about your figures and we ran one of his that had just got re bearinged and we got 10K without tuning the rebuilt (read cleaned and new o ring) carby. And that was with 2 different tachos. Old Fart yes we use APC props, the best "working prop" we can lay our hands on.
Okc woman's handbags come from huge over the shoulder jobbys containing spanners even,to really small ones carelessly slung around with cash falling out.Could we run a women's survey to see if the size is connected to the iq??
My Feedback: (6)
http://www.dailymotion.com/video/xaj...-clip-11_music
I was expecting popey to say that spanners are used for untightening nuts but it looks like i have,you are right tho an angry woman approaching with a bag full of tools is the perfect excuse to try out the new mac 10 she bought you for christmas.
Trev i've just run some good numbers with the 82 on 10% that has been left out in the shed rain hail or shine and it gets a fair bit of daylight,it was pink but in the old refuelling tin it looks green
Trev i've just run some good numbers with the 82 on 10% that has been left out in the shed rain hail or shine and it gets a fair bit of daylight,it was pink but in the old refuelling tin it looks green
My Feedback: (5)
Join Date: Jan 2013
Location: matthews,
NC
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
Well i have tried everything with the same results prop and Dubro prop spinner/nut come loose every time i try to start my inverted Saito. This time i tried the backflip method. I turned the radio and plane on and opened to full throttle. I placed my finger over the carb and turned the prop until i could hear fuel in the carb. moved the throttle down to about 1/4 open . I turned the prop by hand to check for hydro lock and all felt good. I then turned the prop up against the compression at about 2 o clock facing the front of the plane i hand flipped the prop clockwise the prop kicked back and prop,washer and dubro spinner/nut came off. I tightened it down more than any plane i have dealt with before i did any of this. At this point i am at a loss i am thinking of just mounting it sideways and hopefully that corrects the issue. I am totally frustrated and i do appreciate all the past help i have had from this thread.I do have a inverted Saito 72 and it starts with no issues.
Last edited by p3arljam; 02-10-2016 at 11:10 AM.
Senior Member
Join Date: Apr 2010
Location: Cairns, AUSTRALIA
Posts: 1,053
Likes: 0
Received 0 Likes
on
0 Posts
don't prime the engine, pull it through a couple of times and use an electric starter. When starting use 1/4 throttle max and adjust as necessary during the starting procedure.
My Feedback: (5)
Join Date: Jan 2013
Location: matthews,
NC
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
Success!!!!!!! No priming of the engine i hit it with the electric starter and she cracked right up . The idle was perfect now hopefully this windy cold weather will give me a break and i can maiden her...... Thanks to everyone for all the help i will try and put my wingcam on and upload the video link...
Senior Member
Success!!!!!!! No priming of the engine i hit it with the electric starter and she cracked right up . The idle was perfect now hopefully this windy cold weather will give me a break and i can maiden her...... Thanks to everyone for all the help i will try and put my wingcam on and upload the video link...
My Feedback: (102)
Join Date: Dec 2001
Location: Colonial Beach, VA
Posts: 20,370
Likes: 0
Received 25 Likes
on
25 Posts
Dan, I got a surprise yesterday when I sat the old Saito .65 I've been working on into the mount on a GP Big Stick 40. The .65 is too long and the forward mount holes are half a hole off the end of the mount. Rather than butcher the firewall for a different mount as I have in the past I sat a .62 on there. It's a perfect fit. I'll find some other home for the .65.
PS, I now have three of the early high compression Saitos, an early 1.50, and early .80 and the just mentioned .65. Their compression ratios are, 11.24 for the 1.50, 15.5 for the .80 and 12.7 for the .65. Are you ware of any other sizes with high compression. I know there is an early version of the 1.30 twin that has the same 12.7 to 1 as the .65.. Thanks
PS, I now have three of the early high compression Saitos, an early 1.50, and early .80 and the just mentioned .65. Their compression ratios are, 11.24 for the 1.50, 15.5 for the .80 and 12.7 for the .65. Are you ware of any other sizes with high compression. I know there is an early version of the 1.30 twin that has the same 12.7 to 1 as the .65.. Thanks
My Feedback: (1)
This has probably been answered many times but I gotta ask anyway......
What is the best way to get after run oil into the bearings on a Saito (150 in this case)?
Thanks,
Jim
What is the best way to get after run oil into the bearings on a Saito (150 in this case)?
Thanks,
Jim
Sr you keep that kind of friendly stuff up and i'm gettin the 5000psi compressed air nail gun out of my trailer i last put it away after i fired the handbrake.
Pearl awesome result mate.When you first run the engine it can be scary and you don't think sometimes,least i did'nt and when the dust settles you end up with a good inverted saito you are happy to fly.What sr suggested is good re throttle trim but outside the scope of sensible unless you have a huge adjustment range.Don't use any throttle on start up just set the trim to idle at what rpm suits you.
Pearl awesome result mate.When you first run the engine it can be scary and you don't think sometimes,least i did'nt and when the dust settles you end up with a good inverted saito you are happy to fly.What sr suggested is good re throttle trim but outside the scope of sensible unless you have a huge adjustment range.Don't use any throttle on start up just set the trim to idle at what rpm suits you.
My Feedback: (6)
Since all the Saito experts hang out over here and the Saito .56 has been much discussed already I would like your opinions. I'm looking at an old partially finished VK Models Fokker DR.1 Specs are 47" WS, 37" L, 19" high, Weight 5.25 lbs, and recommended engine is a .48 to .70. I am considering a Saito .56 or .62, how do these two compare in performance and why choose that engine? I want scale like performance, it is a WWI airplane it shouldn't rocket or fly 3D. Let the verbal Melee commence!
My Feedback: (102)
Join Date: Dec 2001
Location: Colonial Beach, VA
Posts: 20,370
Likes: 0
Received 25 Likes
on
25 Posts
Jim this is the way I do it, I just pump about two pump strokes into the vent, that usually causes a little to exit the front bearing. It has never effected to front seals ability to do it's job. The larger than .62 engines require 3 pumps strokes.
PS, I ought to mention that I drilled out the original spray aperture and inserted a piece of the plastic fuel tubing that comes with fuel tanks and I never use.
PS, I ought to mention that I drilled out the original spray aperture and inserted a piece of the plastic fuel tubing that comes with fuel tanks and I never use.
Last edited by Hobbsy; 02-11-2016 at 07:32 AM.
My Feedback: (102)
Join Date: Dec 2001
Location: Colonial Beach, VA
Posts: 20,370
Likes: 0
Received 25 Likes
on
25 Posts
http://sceptreflight.net/Model%20Eng...o%20FA-56.html
Here is a nice write up on the .56, neither Clarence Lee nor Peter Chinn evaluated the .62. I suspect Mr. Chinn had already passed away when the .62 came out.
Here is a nice write up on the .56, neither Clarence Lee nor Peter Chinn evaluated the .62. I suspect Mr. Chinn had already passed away when the .62 came out.
My Feedback: (6)
http://sceptreflight.net/Model%20Eng...o%20FA-56.html
Here is a nice write up on the .56, neither Clarence Lee nor Peter Chinn evaluated the .62. I suspect Mr. Chinn had already passed away when the .62 came out.
Here is a nice write up on the .56, neither Clarence Lee nor Peter Chinn evaluated the .62. I suspect Mr. Chinn had already passed away when the .62 came out.
Senior Member
Join Date: Apr 2010
Location: Cairns, AUSTRALIA
Posts: 1,053
Likes: 0
Received 0 Likes
on
0 Posts
On that old VK model, if it is anything like the Marutaka kits I have the 56 will be at the top end of performance that you want. Look at the year of manufacture and then look at the engines of the era to get an idea of what size to fir (Compare HP out put) and remember our modern engines are usually lighter than the older types referred to in old kits.
Senior Member
Dan, I got a surprise yesterday when I sat the old Saito .65 I've been working on into the mount on a GP Big Stick 40. The .65 is too long and the forward mount holes are half a hole off the end of the mount. Rather than butcher the firewall for a different mount as I have in the past I sat a .62 on there. It's a perfect fit. I'll find some other home for the .65.
PS, I now have three of the early high compression Saitos, an early 1.50, and early .80 and the just mentioned .65. Their compression ratios are, 11.24 for the 1.50, 15.5 for the .80 and 12.7 for the .65. Are you ware of any other sizes with high compression. I know there is an early version of the 1.30 twin that has the same 12.7 to 1 as the .65.. Thanks
PS, I now have three of the early high compression Saitos, an early 1.50, and early .80 and the just mentioned .65. Their compression ratios are, 11.24 for the 1.50, 15.5 for the .80 and 12.7 for the .65. Are you ware of any other sizes with high compression. I know there is an early version of the 1.30 twin that has the same 12.7 to 1 as the .65.. Thanks
The FA-200Ti is up there, but I can't remember exactly what it is off the top of my head. I'm pretty sure its in 12.xx:1 range.
It utilizes the FA-91 piston & has a longer stroke to increase displacement to 1.00 Cu In per cylinder. That is probably where the extra compression comes from.