RE: ASP/MAGNUM FS400AR Rebuild/Overhaul
 

It lives! nice job :D

Also its funny you metion the head shims, on mine i seemed to have an odd number of shims. some heads had 2, some 3, and one had none. so i gave up trying to understand it and gave each head the same number (1 i think) as they didnt seem to have any use :s</p>

RE: ASP/MAGNUM FS400AR Rebuild/Overhaul
 

Sniff sniff:(... Tears in my eyes..[:o]

Sound better with out the Kelo... Good vid rev..

RE: ASP/MAGNUM FS400AR Rebuild/Overhaul
 

@Tom&Carosel:
Thanks. Really happy its up and running now. Did give me a bit of a headache with those valves and there where times when I saw my investment go down the drain but now its running.

@jaav:
honestly? for the money I put into it I could have bought a good used 400 here. Add the hours I spent on it and its not the least bit economical. In the end it was really just an act of stubborness and wanting a good 400 with quality parts inside...

Rev

RE: ASP/MAGNUM FS400AR Rebuild/Overhaul
 

You always knew it was going to be uneconomical tho rebuild her... At least you can say you did it..[8D]

RE: ASP/MAGNUM FS400AR Rebuild/Overhaul
 

I knew that from the start. Only, in the end, I was only €150 short of buying a new one. The Euros I wrote in the movie are w/o the engine I sent you ;) Just wanted you to feel better about your decision to send it over.

But like you said, I am happy it payed off, I learned a ton of stuff about these engines and I have a cool movie to show at the field:D

RE: ASP/MAGNUM FS400AR Rebuild/Overhaul
 

So, what happens if you leave out the head shims?

Higher compression ratio? Hmmmm!

Any piston/valve interferance W/O the shims?

RE: ASP/MAGNUM FS400AR Rebuild/Overhaul
 

i have had no collision issues, and as mine has no compression when hot anyway upping th c/r will make little difference!</p>

RE: ASP/MAGNUM FS400AR Rebuild/Overhaul
 

Well, the weather here is slowly improving and the snow is melting :D this means that soon i hope to have my 400 back in the air. As it all seems a little quiet round here, other than rev trying to raise the dead, i was wondering if anyone has a 400 in the air at the moment. If so, wheres the videos?! :p

RE: ASP/MAGNUM FS400AR Rebuild/Overhaul
 

:D

http://www.youtube.com/playlist?list...eature=edit_ok

RE: ASP/MAGNUM FS400AR Rebuild/Overhaul
 

lol, nice :p

RE: ASP/MAGNUM FS400AR Rebuild/Overhaul
 

After the initial break in progress according to Manual the Aussie 400AR is doing 7.350 rpm with a 20x8. It is -10C outside, the engine is still running very rich and has only 20 running minutes on the clock so I am sure these numbers will improve considerably.

I am very happy :D


@tom: love your list. been through it a couple of times in times of cold turkey :)

RE: ASP/MAGNUM FS400AR Rebuild/Overhaul
 

depending on the brand of 20x8 i expect between 7200 and 8000. apc i expect to be near 8000 i must say. menz 72/7300

RE: ASP/MAGNUM FS400AR Rebuild/Overhaul
 

like I said, still running very rich, have not tuned it to top RPM yet.

To be honest, I am getting old. A couple of years ago -10°C wouldn't have kept me from being at the field and flying. Today it just seems so much cosier in my workshop :D

A cup of hot earl grey, some motivation and warbirdradio on the Laptop and you are ready to go.

When I did the after season check on my Stearman I found at least two broken stringers at the rear of the fuse. Due to the fact, that I have fallen deeply in love with this plane I wanted to redo it anyhow to here goes :eek:

http://www.bilderload.com/bild/284746/stearmanGD8O5.jpg

http://www.bilderload.com/bild/284747/image2N6UED.jpg

http://www.bilderload.com/bild/284748/image3XI0QJ.jpg

http://www.bilderload.com/bild/284749/image7KNXX2.jpg

RE: ASP/MAGNUM FS400AR Rebuild/Overhaul
 

ohh my he's got the litho plate out.... :p lookin good rev. I have a huge jungmeister im working on at the moment for my saito 450. Im not going to town on it though. My hurricane however is going to get some detailing. I have the panels marked out already!

RE: ASP/MAGNUM FS400AR Rebuild/Overhaul
 

HK got another load of 400's in stock....total of 39 now.

RE: ASP/MAGNUM FS400AR Rebuild/Overhaul
 

Beautiful photo of the Jung with a 400 and a Kelo ring there Phill.. -10deg!! its a wonder she started..I know I'd never get out of bed..Flying today at the Beach with the faithful OS, 38deg and no wind...Bloody humid...

RE: ASP/MAGNUM FS400AR Rebuild/Overhaul
 

You did a nice job of stripping that old girl. Amazed it came off so clean!

RE: ASP/MAGNUM FS400AR Rebuild/Overhaul
 

I just received mine from HK today, a new engine for new upgrades &deg;))) will fit a PRECEDENT T240 as test-bench. I don't think I will have enough time to make a mirror as Tom, but the 1st step will be ball bearings replacement by "European quality"

RE: ASP/MAGNUM FS400AR Rebuild/Overhaul
 

Dont tempt me you guys. I am tempted to get aother for my Sea Fury.....

RE: ASP/MAGNUM FS400AR Rebuild/Overhaul
 

you need at least two! a running one and one to play around with :D

Stearman coming along step by step...

RE: ASP/MAGNUM FS400AR Rebuild/Overhaul
 

Hi Olivier! A T240 seems an unusual plane for a radial but heck, no more unusual than a Fly Baby. :p

RE: ASP/MAGNUM FS400AR Rebuild/Overhaul
 

My Pacer and Jayracer are not the norm as flying test benches either! But, i cannot afford another engine right now. unless i can sell the 450. But, the 450 is going in the Jungmeister and rev you are putting me to shame with the speed of your build!

RE: ASP/MAGNUM FS400AR Rebuild/Overhaul
 

Gentlemen, miracles still happen.

I recieved a set of cam followers from just engines today. Brilliant service as usual. Unbelievably, the Chinese have actually taken an existing part and made it BETTER! The new followers are flat bottomed as to not eat their way into the cam drum. I am genuinely impressed. Have ordered more for my own engine as to exchange the drill bits that are still running in it :eek:.

After putting them into the 400 I am currently working on I turned it and it greeted me with the clickety-click that I only know from the big Mokis. Must be the new followers.

Rev

RE: ASP/MAGNUM FS400AR Rebuild/Overhaul
 

My friend just sent me this link...looks like another 400 in the air and a vid I have not seen! Although the vid is not very high quality you can see the 400 has no problem dragging this giant top flight p47 around.


http://www.youtube.com/watch?v=mk-VR...ature=youtu.be

RE: ASP/MAGNUM FS400AR Rebuild/Overhaul
 

I hate you guys. i have put out an advert here looking for another 400 in any condition. as they are complicated and scary chances are someone will have a broken one i can revive! Either way i hold you all to blame for the damage to my bank account :p