Special on Ace Pulse Commander receiver
03-15-2016, 10:51 AM
#1
Thread Starter
Special on Ace Pulse Commander receiver
The receiver below was purchased by Mad Man, have fun pulsing away!
I just took a trade in on a Mike Dorffler Ace Pulse Commander receiver on 27MHz. This is for all Adams actuators and runs on 2.4 volts (2 NiCads). This receiver is identical in size, and performance to the original Ace receiver, but weighs much less. It's in very nice condition and works great. $29.00 plus Priority mail shipping ($5.75). It is currently on 27.045MHz (red). I can change the frequency and re-tune it for an additional $5.00. I'm putting here for you guys first, and if nobody needs it, then I'll list it on ebay.
Here is a link to the completed auction, I got it from the guy who won the acution: http://www.ebay.com/itm/Ace-Pulse-re...oAAOSwa-dWiH4L
Jay
[email protected]
I just took a trade in on a Mike Dorffler Ace Pulse Commander receiver on 27MHz. This is for all Adams actuators and runs on 2.4 volts (2 NiCads). This receiver is identical in size, and performance to the original Ace receiver, but weighs much less. It's in very nice condition and works great. $29.00 plus Priority mail shipping ($5.75). It is currently on 27.045MHz (red). I can change the frequency and re-tune it for an additional $5.00. I'm putting here for you guys first, and if nobody needs it, then I'll list it on ebay.
Here is a link to the completed auction, I got it from the guy who won the acution: http://www.ebay.com/itm/Ace-Pulse-re...oAAOSwa-dWiH4L
Jay
[email protected]
Last edited by jaymen; 04-21-2016 at 02:00 PM.
03-24-2016, 06:20 PM
#3
Join Date: Jan 2003
Location: Oakdale, CT
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
Jay,
I am interested in your receiver . I have an old ace transmitter on 27.045 (red) so that would be perfect. Let me know if you still have it and I'll get you out a USPS MO right away. I also have some news on those Ace / Rand stick bales My guy Sandy has made a drawing from 3d solid works but mine had a crumpled up end where the pot is clamped so I am disassembling (very carefully) one of my good ones and then he will finish the end that is the problem. The only thing he is having trouble with his resolution is on the ratchet for the throttle stick but I don't think it is necessary for what I need. I'll send you a drawing as soon as we get it done. If this works it will be great as I only have 2 out of 11 that are not broken.
Thanks
Mark O'Connell
I am interested in your receiver . I have an old ace transmitter on 27.045 (red) so that would be perfect. Let me know if you still have it and I'll get you out a USPS MO right away. I also have some news on those Ace / Rand stick bales My guy Sandy has made a drawing from 3d solid works but mine had a crumpled up end where the pot is clamped so I am disassembling (very carefully) one of my good ones and then he will finish the end that is the problem. The only thing he is having trouble with his resolution is on the ratchet for the throttle stick but I don't think it is necessary for what I need. I'll send you a drawing as soon as we get it done. If this works it will be great as I only have 2 out of 11 that are not broken.
Thanks
Mark O'Connell
03-25-2016, 11:05 AM
#4
Thread Starter
Yes Mark,
I still have the receiver, was just about to list it but would rather you get it without having to get in a bidding war!
The ratchet is only for throttle, not applicable to the GG and Ace pulse units, where it is not used. If you ever come across some of the later Ace/Rand stick assemblies, the bales were made from a better plastic which is black, and does not crack with age. I have seen the 3 channel Cannon transmitters which have these black bales, along with Ace Pulse Commanders and Ace GG Pulse Pack transmitters that were sent in to the factory and retro-fitted with black bales. Obviously, Ace knew of, and came up with a fix for this chronic problem.
Jay
I still have the receiver, was just about to list it but would rather you get it without having to get in a bidding war!
The ratchet is only for throttle, not applicable to the GG and Ace pulse units, where it is not used. If you ever come across some of the later Ace/Rand stick assemblies, the bales were made from a better plastic which is black, and does not crack with age. I have seen the 3 channel Cannon transmitters which have these black bales, along with Ace Pulse Commanders and Ace GG Pulse Pack transmitters that were sent in to the factory and retro-fitted with black bales. Obviously, Ace knew of, and came up with a fix for this chronic problem.
Jay
03-25-2016, 05:35 PM
#5
Join Date: Jan 2003
Location: Oakdale, CT
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
Jay,
I'll get you a MO out on Monday morning. I need your address for the mail. I do have one of the black bales it is the one I am carefully removing for Sandy to copy. I'll tell him that the ratchet is not needed. He works for Whelan Engineering the light people so I know that they are into intricate parts. I'll be looking for your address.
Thank you,
Mark O'Connell
I'll get you a MO out on Monday morning. I need your address for the mail. I do have one of the black bales it is the one I am carefully removing for Sandy to copy. I'll tell him that the ratchet is not needed. He works for Whelan Engineering the light people so I know that they are into intricate parts. I'll be looking for your address.
Thank you,
Mark O'Connell
