AXE CP Blade Grip Fix
01-22-2007, 01:14 PM
#1
Junior Member
Thread Starter
Join Date: Jan 2007
Location: rochester,
NY
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
AXE CP Blade Grip Fix
step 1: smooth broken blade grip at break but leave some material (1/8 inch)
step 2: drill a 3/32 hole as close to center as possible
step 3: thread ball link part # LOSB1051 into blade grip
step 4: thread mini-t ball cup part # LOSB1049 onto one side of link and make the same length as the other one
i ran a pack through the heli after the fix with no problems...
~JaSoN
step 2: drill a 3/32 hole as close to center as possible
step 3: thread ball link part # LOSB1051 into blade grip
step 4: thread mini-t ball cup part # LOSB1049 onto one side of link and make the same length as the other one
i ran a pack through the heli after the fix with no problems...
~JaSoN
