Otptic 6 - Model 3 - Elevator Problem
09-15-2013, 11:11 AM
#1
Senior Member
Thread Starter
Join Date: Feb 2003
Location: Lake County,
CA
Posts: 1,555
Likes: 0
Received 0 Likes
on
0 Posts
Otptic 6 - Model 3 - Elevator Problem
Mike,
I have an Optic 6 converted to 2.4 mHz.
I have been going nuts because the elevator has been very erratic on a new model.
I changed out receivers, servos, batteries - same problem.
Wasn't having this problem on any other planes.
Then is struck me, that channel was bad on that model.
I switched to Model 4 and all seems to be well.
Obviously, the radio needs service.
Have you seen this problem before?
Should I be worried about other models?
Thanks,
KW_Counter
I have an Optic 6 converted to 2.4 mHz.
I have been going nuts because the elevator has been very erratic on a new model.
I changed out receivers, servos, batteries - same problem.
Wasn't having this problem on any other planes.
Then is struck me, that channel was bad on that model.
I switched to Model 4 and all seems to be well.
Obviously, the radio needs service.
Have you seen this problem before?
Should I be worried about other models?
Thanks,
KW_Counter
