Ebay F4.6
#1
Senior Member
Thread Starter
Join Date: Jul 2009
Location: F-------,
ME
Posts: 450
Likes: 0
Received 0 Likes
on
0 Posts
Ebay F4.6
As you know, I'm trying to get a new Picco .28 P3 at less than $100 out of my own pocket, and almost did last weekend but lost the bid by a couple dollars. What do you think I could sell a broken in but never used half gallon F4.6 for on ebay? It really works well, never gone over 270 and continued to run it, and i broke it in with about 15 tanks. I have videos of my Savage with it in it bashing doing wheelies and showing power. Do you think I could get $100 bucks on ebay for it?
#3
Senior Member
Thread Starter
Join Date: Jul 2009
Location: F-------,
ME
Posts: 450
Likes: 0
Received 0 Likes
on
0 Posts
RE: Ebay F4.6
If you ask me, this engine is worth more than new since its pre broken in and never abused, but I guess I can't really prove that to anyone online. : (
Well, I guess 85$ could work. I'll do an auction. 85$ or highest bid. Now I just need to find a Picco .28 for $185. Or is there some way to prove from pictures that the engine is in peak condition? Like taking it apart or something? : (
Is Active Powersports a scam? I notice it has the lowest price for the picco by $20.......... seems like something is wrong there.
Well, I guess 85$ could work. I'll do an auction. 85$ or highest bid. Now I just need to find a Picco .28 for $185. Or is there some way to prove from pictures that the engine is in peak condition? Like taking it apart or something? : (
Is Active Powersports a scam? I notice it has the lowest price for the picco by $20.......... seems like something is wrong there.
#5
Senior Member
Join Date: Sep 2010
Location: Gilber,
AZ
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
RE: Ebay F4.6
You could be a really good sales person but there are way to many idiots that cant break an engine in. I trust nobody but myself for this process so IMO it could be a junked engine. If the Head is not scratched that will help. if it has any scratches on it forget it and good luck with getting 85 bux for it.
The last thing I would do is take the engine apart. You maybe better off trying to sell it here rather then ebay. Dont forget the business side of it....Percentage to Ebay and percentage to Paypal. It's not worth the effort for 85.00-10.00 in percentages 75.00 bux.
There are plenty of forums you may have better luck with rather then Ebay
The last thing I would do is take the engine apart. You maybe better off trying to sell it here rather then ebay. Dont forget the business side of it....Percentage to Ebay and percentage to Paypal. It's not worth the effort for 85.00-10.00 in percentages 75.00 bux.
There are plenty of forums you may have better luck with rather then Ebay
#7
RE: Ebay F4.6
ORIGINAL: SMOKEFAN
You could be a really good sales person but there are way to many idiots that cant break an engine in. I trust nobody but myself for this process so IMO it could be a junked engine. If the Head is not scratched that will help.
You could be a really good sales person but there are way to many idiots that cant break an engine in. I trust nobody but myself for this process so IMO it could be a junked engine. If the Head is not scratched that will help.
I also bought a engine labeled HPI .12 that was supposedly only broken in, and used 3 additional tanks. Got if for $30 turned out to a G3.0 that had a black piston head, and the piston has some scratches on top (luckily none on the sides), and again piston was not kept at BDC so I had a royal pain to turn the damn flywheel.
So to the OP I'm sure you know what your doing but alot of people hit crap like that on ebay and no longer believe the ads. Personally I'd only go 1/3rd of the price tops for a used engine.
#8
Senior Member
Thread Starter
Join Date: Jul 2009
Location: F-------,
ME
Posts: 450
Likes: 0
Received 0 Likes
on
0 Posts
RE: Ebay F4.6
*sighs*
Well I guess it's useless then. I need at least $85 and it doesn't seem like I'm going to get that much. : (
I might as well keep counting my pennies.... : (
Well I guess it's useless then. I need at least $85 and it doesn't seem like I'm going to get that much. : (
I might as well keep counting my pennies.... : (
#9
Senior Member
Thread Starter
Join Date: Jul 2009
Location: F-------,
ME
Posts: 450
Likes: 0
Received 0 Likes
on
0 Posts
RE: Ebay F4.6
Here it is.... It's just your average F4.6...... As you can see, no bent fins or anything but there is a scratch on the head. So that's not good. (Damn plastic roll bar bends too much!)
It's not cleaned or anything, this is right before I put it back into my FLMed savage.
So I was just looking around and I saw a guy on SavvyCentral who sold one that looks practically identical to mine for $90! And someone bought it! There may be a hope yet.
Tell me, does the F4.6 clutch, flywheel, and engine mounting plate work with the Picco .28? And how many clutch bell teeth should I use for the Picco?
Thanks a lot guys, you are so helpful!
It's not cleaned or anything, this is right before I put it back into my FLMed savage.
So I was just looking around and I saw a guy on SavvyCentral who sold one that looks practically identical to mine for $90! And someone bought it! There may be a hope yet.
Tell me, does the F4.6 clutch, flywheel, and engine mounting plate work with the Picco .28? And how many clutch bell teeth should I use for the Picco?
Thanks a lot guys, you are so helpful!
#10
Senior Member
My Feedback: (4)
Join Date: Dec 2004
Location: Merna, NE
Posts: 1,105
Likes: 0
Received 0 Likes
on
0 Posts
RE: Ebay F4.6
What are you going to do when you start breaking drive line parts due to the Higher HP of the Picco? If you cant affort the engine out rite how do you plan to keep up on broken parts. Having a big bad high hp motor is all fun but be prepaired for repairs.
#11
Senior Member
Thread Starter
Join Date: Jul 2009
Location: F-------,
ME
Posts: 450
Likes: 0
Received 0 Likes
on
0 Posts
RE: Ebay F4.6
I figure it'll be at least a year before I need to put in the BP diffs. Its not really a matter of having the money, its a mater of having the money now .
#20
Senior Member
Join Date: Sep 2010
Location: Gilber,
AZ
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
RE: Ebay F4.6
C'mon guys give the kid a break.
Hang in there kid. Mow some lawns or something. Use your noodle and youll get what you want and learn something along the way
Hang in there kid. Mow some lawns or something. Use your noodle and youll get what you want and learn something along the way
#21
Senior Member
Thread Starter
Join Date: Jul 2009
Location: F-------,
ME
Posts: 450
Likes: 0
Received 0 Likes
on
0 Posts
RE: Ebay F4.6
Thanks smoke. I got something lined up for the summer but bashing season would be over by that time... I completely forgot #1 rule: If you're a kid don't admit your age on an adult forum... If you don't you'll be fine and everyone will take you seriously as long as you use good grammar!
FYI the pipe is brand new.
FYI the pipe is brand new.
#22
Senior Member
Join Date: Jan 2008
Location: Red Oak,
TX
Posts: 464
Likes: 0
Received 0 Likes
on
0 Posts
RE: Ebay F4.6
Put it on ebay hope for the best, or set a starting bid at your bottom dollar! If it dosen't sale relist it at less! Tower Hobbies Picco P3 .28 $174.99! Work hard and you'll get there!
#23
Senior Member
Thread Starter
Join Date: Jul 2009
Location: F-------,
ME
Posts: 450
Likes: 0
Received 0 Likes
on
0 Posts
RE: Ebay F4.6
It sold ; )
I actually posted on Savage Central. I got the cash on Wednesday and I'm shipping it tomorrow.
Last time i checked Tower had it for 199
*EDIT*: I see they have a discount code going that reduces $199 orders by $25
I actually posted on Savage Central. I got the cash on Wednesday and I'm shipping it tomorrow.
Last time i checked Tower had it for 199
*EDIT*: I see they have a discount code going that reduces $199 orders by $25