Starting Shaft Slipping, Help plz.
08-08-2014, 05:21 PM
#1
Junior Member
Thread Starter
Join Date: Aug 2014
Location: Canada Ontario, Near Barrie
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Starter pin Slipping (Fixed)
So the pin/spring on the starter shaft was slipping and I would not crank over my truck. NOT OWB
I opened it up took the spring out looked at it and re installed it and like magic it worked again.
It could possibly have been stuck or something but it was clean.
No idea what happened.
No idea what I did to fix it besides taking it apart and putting it back together.
Now I need some fuel to see why I can't open up the throttle without it stalling. Thanks for now.
I opened it up took the spring out looked at it and re installed it and like magic it worked again.
It could possibly have been stuck or something but it was clean.
No idea what happened.
No idea what I did to fix it besides taking it apart and putting it back together.
Now I need some fuel to see why I can't open up the throttle without it stalling. Thanks for now.
Last edited by StarSolo; 08-09-2014 at 01:59 PM.
