New motor advice needed
#1
Senior Member
Thread Starter
Join Date: Sep 2004
Location: Morrison,
IL
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
New motor advice needed
I'm looking for a new powerful S25 replacement (got some extra x-mas money)
My list of possible motors are..
Wasp 28
Wasp 26
SH28
Mach 26
I've never had any of these and would like some input to help decide. I see that the parts are available at my LHS for both Wasp motors. However, I've heard some really great things about the SH 28. Any info on the Mach 26? Any 1st hand or even 2nd hand input is appreciated.
Thanks,
Scott
My list of possible motors are..
Wasp 28
Wasp 26
SH28
Mach 26
I've never had any of these and would like some input to help decide. I see that the parts are available at my LHS for both Wasp motors. However, I've heard some really great things about the SH 28. Any info on the Mach 26? Any 1st hand or even 2nd hand input is appreciated.
Thanks,
Scott
#2
RE: New motor advice needed
For x-mas my friend and I got a wasp .28. I'm currently installing mine and he's almost done with the break in procedure. It's very impressive..........
#3
Senior Member
Join Date: May 2003
Location: St. Charles, IL
Posts: 1,014
Likes: 0
Received 0 Likes
on
0 Posts
RE: New motor advice needed
the SH28 is just sick, tons of low end, ebay has them pretty cheap also. I had the picco 26 same as the wasp and was not very happy with it.
#4
Senior Member
Join Date: Aug 2002
Location: W. Long Branch,
NJ
Posts: 1,059
Likes: 0
Received 0 Likes
on
0 Posts
RE: New motor advice needed
i still have the stock but word on the street is the sh has a lot more low and mid range, but the wasp has a little more topend
#6
Senior Member
Join Date: Jul 2004
Location: leicestershire, UNITED KINGDOM
Posts: 824
Likes: 0
Received 0 Likes
on
0 Posts
RE: New motor advice needed
i have 2 SH.28's one in my savage and one in my mbx5(converted to non pull start), these engines are insanely powerfull, amazing low end but also very impessive on top,