New to Rc Trucking
#1
Junior Member
Thread Starter
Join Date: Jan 2005
Location: Charlotte, NC
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
New to Rc Trucking
I just bought the Savage SS. I have put it together and everything run fine except I can't get the front wheels to turn at all. I take the dogbones off the Servo to make sure the Servo turns. It turns fine, when I put the dogbone back on and try and turn the wheels, they don't turn. The guy at the Hobby store said I have to have the truck actually running and wheels turning to turn the vehicle, I tried that it they still don't turn. Any suggestions??
#3
Junior Member
Thread Starter
Join Date: Jan 2005
Location: Charlotte, NC
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
RE: New to Rc Trucking
The Servo Horn is fine, everything on the Servo works. I put in another New Servo Horn on and the samething happens. I can turn the wheels manually and everything turns fine nothing slips. But when I try and turn it with power it won't push the dogbone forward to trun the wheels.
#4
Senior Member
Join Date: Jan 2004
Location: MESQUITE, TX
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
RE: New to Rc Trucking
Just a thought. does it work when the front end is off the ground?
Do you have a hi tork servo?
Is your steering set on your remote?
Info was kind of limited so I thought I would hit the basics[]
Do you have a hi tork servo?
Is your steering set on your remote?
Info was kind of limited so I thought I would hit the basics[]