Does anybody need?
#1
Senior Member
Thread Starter
Join Date: Dec 2006
Location: Salina,
KS
Posts: 6,113
Likes: 0
Received 0 Likes
on
0 Posts
Does anybody need?
An old style transmission case?
An X or XL differential case?
Shiny dogbones?
The old style uprights?
A 21-25 radio box?
25 or X axles?
They are too good to toss in the 55 gallon drum and I am getting tired of moving them around. I would like to give the parts away to somebody that needs them, not to somebody that wants to stock their spare parts box or to sell on Ebay.
I have switched all of my trucks over to the wider XL axles, heavier bones, differentials and had spares before I took parts out of my trucks. BB
An X or XL differential case?
Shiny dogbones?
The old style uprights?
A 21-25 radio box?
25 or X axles?
They are too good to toss in the 55 gallon drum and I am getting tired of moving them around. I would like to give the parts away to somebody that needs them, not to somebody that wants to stock their spare parts box or to sell on Ebay.
I have switched all of my trucks over to the wider XL axles, heavier bones, differentials and had spares before I took parts out of my trucks. BB
#7
Senior Member
Join Date: Aug 2006
Location: BURLINGTON,
IA
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
RE: Does anybody need?
ORIGINAL: twomanytoys
Earnhart,
The 25 a arms are going to be stronger than the x a arms.
Earnhart,
The 25 a arms are going to be stronger than the x a arms.
I have had some problems already with the 25 SS arms the shock ends pop of the balls. I put washers on the screws and that is working for now i just thought that the X arms have the shock ends fit down in to a slot in the Arms so they would come out.
Thanks for the info.
E3
#8
Senior Member
Thread Starter
Join Date: Dec 2006
Location: Salina,
KS
Posts: 6,113
Likes: 0
Received 0 Likes
on
0 Posts
RE: Does anybody need?
No spare arms:
Van Pelt and Pythonfan, I have you guys covered.
I also have;
two HPI polished pipes
one ribbed pipe
one Hot Body polished pipe that needs the spring style couple on the manifold. The polished and ribbed pipes have manifolds.
I should have another polished pipe today, my XL should be here this afternoon.
So if you are running a plastic melted pipe, have a beat up polished pipe or am in need for some other reason, they are free also.
The ribbed pipe is silver and needs cleaned up. I have had nothing but bad experiences with Hpi pipes. I know of a few guys that make them work, but I hate their leaking silicon couplers as well.
Again, I ask that you need the parts and not that you are stocking your tool or parts boxes. [8D] I could sell them on Ebay or here as good as the next guy, just trying to help somebody out here.
My Ebay account has over 1800 positive feedback with no negatives and one neutral. A guy thought five bucks to go to the post office, fill out customs papers, and ship a package to Canada was too high. Sometimes I have to stand in line for 30 minutes to ship out of country packages, five bucks, over half of it postage and then the packing and auction fees..... what a jerk!!
OK, I ragged enough..
BB
Van Pelt and Pythonfan, I have you guys covered.
I also have;
two HPI polished pipes
one ribbed pipe
one Hot Body polished pipe that needs the spring style couple on the manifold. The polished and ribbed pipes have manifolds.
I should have another polished pipe today, my XL should be here this afternoon.
So if you are running a plastic melted pipe, have a beat up polished pipe or am in need for some other reason, they are free also.
The ribbed pipe is silver and needs cleaned up. I have had nothing but bad experiences with Hpi pipes. I know of a few guys that make them work, but I hate their leaking silicon couplers as well.
Again, I ask that you need the parts and not that you are stocking your tool or parts boxes. [8D] I could sell them on Ebay or here as good as the next guy, just trying to help somebody out here.
My Ebay account has over 1800 positive feedback with no negatives and one neutral. A guy thought five bucks to go to the post office, fill out customs papers, and ship a package to Canada was too high. Sometimes I have to stand in line for 30 minutes to ship out of country packages, five bucks, over half of it postage and then the packing and auction fees..... what a jerk!!
OK, I ragged enough..
BB
#12
Senior Member
Thread Starter
Join Date: Dec 2006
Location: Salina,
KS
Posts: 6,113
Likes: 0
Received 0 Likes
on
0 Posts
RE: Does anybody need?
The ribbed pipe had three requests, so it is gone and I have one polished pipe left that TwoMany has dibs on if he wants it. BB
#13
Senior Member
Thread Starter
Join Date: Dec 2006
Location: Salina,
KS
Posts: 6,113
Likes: 0
Received 0 Likes
on
0 Posts
RE: Does anybody need?
That is what I was referring to as a differential case or housing. In the event somebody broke one, wiped out the pinion carrier or something else... I gutted them and moved the parts over to the 25 housings that are in my trucks. I have several complete four gear aluminum cup differentials downstairs that I will keep for parts. BB
#14
RE: Does anybody need?
Good man BudBud! This is what its all about, I just want to share about an experience I had. This really cool guy emailed me from RCU about drag racing, and through our talking he found out my bro's S-maxx was in need of an engine, and my T-maxx in need of servos. He completely surprised me when he offered me an almost NIB O.S. .18 with complete exhaust for my bro's car, and a full set of servos for the T-maxx. Awesome guy and I am extremely grateful to him, he will make a lot of nitro running this summer possible. Tom.
#16
RE: Does anybody need?
He gave us an O.S. .18 CV-R, never seen one run but the pinch is tighter than all of my engines on it. He also modded the crank and sleeve, only 20 tanks on it. Cant wait to cut the crank and start it already I hope its as great as it looks Sorry for going off topic, and I hope all the guys you gave parts to really needed them BB. Tom.
#17
Senior Member
Thread Starter
Join Date: Dec 2006
Location: Salina,
KS
Posts: 6,113
Likes: 0
Received 0 Likes
on
0 Posts
RE: Does anybody need?
[link=http://youtube.com/watch?v=L8fkP9lTijg&feature=related]That is okay[/link], I think the forums ought to be like converstaions and not you have to post about this topic only. We got there inncently enough. The link is for an 18 CV-R that I put in my nephew's RC10GT-2. It is quick! BB
#19
Senior Member
Thread Starter
Join Date: Dec 2006
Location: Salina,
KS
Posts: 6,113
Likes: 0
Received 0 Likes
on
0 Posts
RE: Does anybody need?
ORIGINAL: burnchassis3
Helpin a brother out!
NICE!
CS
Helpin a brother out!
NICE!
CS
#20
Senior Member
My Feedback: (1)
Join Date: Nov 2004
Location: Florida
Posts: 5,047
Likes: 0
Received 0 Likes
on
0 Posts
RE: Does anybody need?
ORIGINAL: BudBud
I looked for your thread and could not find it. I was just going to add to it. BB
ORIGINAL: burnchassis3
Helpin a brother out!
NICE!
CS
Helpin a brother out!
NICE!
CS
#21
Senior Member
Thread Starter
Join Date: Dec 2006
Location: Salina,
KS
Posts: 6,113
Likes: 0
Received 0 Likes
on
0 Posts
RE: Does anybody need?
I wondered when people were putting prices to some of it. This stuff is all free, I just ask that they actually need it.
If anybody is running the old 2 gear or plastic cups and wants a spare or two, I have a couple of those as well. I will never go back, my thirst for speed and power just destroys them. BB
If anybody is running the old 2 gear or plastic cups and wants a spare or two, I have a couple of those as well. I will never go back, my thirst for speed and power just destroys them. BB
#22
Senior Member
Join Date: Sep 2007
Location: dale city, VA
Posts: 1,339
Likes: 0
Received 0 Likes
on
0 Posts
RE: Does anybody need?
well i have traxxas trucks and sometimes come over here to check out the talk. i'm thinking of getting a savage..
but i just have to say that is pretty cool of you wanting to give that stuff to someone that could use it rather then it collect dust or you selling them... your a good guy!!! jake..
p.s wouldnt happen to have a rtr savage you dont want do you?? [sm=wink_smile.gif][sm=biggrin.gif]
but i just have to say that is pretty cool of you wanting to give that stuff to someone that could use it rather then it collect dust or you selling them... your a good guy!!! jake..
p.s wouldnt happen to have a rtr savage you dont want do you?? [sm=wink_smile.gif][sm=biggrin.gif]
#23
Senior Member
Thread Starter
Join Date: Dec 2006
Location: Salina,
KS
Posts: 6,113
Likes: 0
Received 0 Likes
on
0 Posts
RE: Does anybody need?
Thanks Jake, I am fresh out of RTR Savages, I have four to move around, but I have five drivers around here wanting to claim them.
I am out of dog bones now, they are all spoken for.
There's the Savage clan now... BB
I am out of dog bones now, they are all spoken for.
There's the Savage clan now... BB
#25
Senior Member
Thread Starter
Join Date: Dec 2006
Location: Salina,
KS
Posts: 6,113
Likes: 0
Received 0 Likes
on
0 Posts
RE: Does anybody need?
How about axles or uprights? I will have another set of uprights soon, used, but, ever so gently, of course. A lot of those axles are new. BB