Savage 21 Front grill
#1
Senior Member
Thread Starter
Join Date: Aug 2007
Location: applevalley,
CA
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
Savage 21 Front grill
I know some one else here has done this before and better' I though I'll give it a shot too. Here's my grill mod it's not the best but it works pretty good check it out let me know what ya' think?
#5
RE: Savage 21 Front grill
Use a rotary tool and pretty much any bit like a grinding stone or whatever. Just grind away slowly until you get the proper results. Then use some kind of steel black fine mesh to make a grill.
Tom.
Tom.
#6
Senior Member
Thread Starter
Join Date: Aug 2007
Location: applevalley,
CA
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
RE: Savage 21 Front grill
ORIGINAL: GANGstar305
so with this i dont have to do any holes in the winsheild? how do i do this?
so with this i dont have to do any holes in the winsheild? how do i do this?
#7
Senior Member
Join Date: Jan 2007
Location: Manitowoc,
WI
Posts: 365
Likes: 0
Received 0 Likes
on
0 Posts
RE: Savage 21 Front grill
I used some plastic canvas mesh you find at hobby lobby in the craft or sewing dept. Comes in all differant colors
http://www.craftsetc.com/store/searc...m=plastic+mesh
Here is a bed cover i made for my 1/10 scale i used to have. Works good for grills , windows ect.
http://www.craftsetc.com/store/searc...m=plastic+mesh
Here is a bed cover i made for my 1/10 scale i used to have. Works good for grills , windows ect.
#8
Senior Member
Thread Starter
Join Date: Aug 2007
Location: applevalley,
CA
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
RE: Savage 21 Front grill
ORIGINAL: hawk900
I used some plastic canvas mesh you find at hobby lobby in the craft or sewing dept. Comes in all differant colors
http://www.craftsetc.com/store/searc...m=plastic+mesh
Here is a bed cover i made for my 1/10 scale i used to have. Works good for grills , windows ect.
I used some plastic canvas mesh you find at hobby lobby in the craft or sewing dept. Comes in all differant colors
http://www.craftsetc.com/store/searc...m=plastic+mesh
Here is a bed cover i made for my 1/10 scale i used to have. Works good for grills , windows ect.