Aerofly Pro Deluxe and JR 11x Problems
#1
Thread Starter
Join Date: Dec 2006
Location: , CA
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Aerofly Pro Deluxe and JR 11x Problems
I've successfully used Aerofly Pro Deluxe on my Futaba 12FG radio. Sold the radio and now using a JR 11X.
The software does not recognize the tx "Aerofly pro has located the USB interface cable, but was unable to either find a transmitter connected to the USB interface or..."
I am plugging into the Ikarus USB adapter using the 3wire JR style connector (brown wire going to the outside of the USB Adapter) then into the jack plugged into the back of the tx.
I am SLAVE mode (in the Trainer menu). Although I tried MASTER too. Nothing works.
Tell me what I am doing wrong.
Thanks in advance.
- Rob
The software does not recognize the tx "Aerofly pro has located the USB interface cable, but was unable to either find a transmitter connected to the USB interface or..."
I am plugging into the Ikarus USB adapter using the 3wire JR style connector (brown wire going to the outside of the USB Adapter) then into the jack plugged into the back of the tx.
I am SLAVE mode (in the Trainer menu). Although I tried MASTER too. Nothing works.
Tell me what I am doing wrong.
Thanks in advance.
- Rob
#4
Thread Starter
Join Date: Dec 2006
Location: , CA
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
RE: Aerofly Pro Deluxe and JR 11x Problems
OK - I put it back to Master mode and same problem. I attached a pic of the wire setup.
I don't know how to put it in PPM mode. I looked through the manual for the 11X and it was no help either. It appears to be in DSM mode.
Suggestions.
I don't know how to put it in PPM mode. I looked through the manual for the 11X and it was no help either. It appears to be in DSM mode.
Suggestions.
#9
Join Date: Aug 2006
Location: Weston,
FL
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
RE: Aerofly Pro Deluxe and JR 11x Problems
Hi Rajul,
I received my AF5 and was abñe to installed in my Mac, but it can recognizes my JR X9503 or XP7202. I saw your answer about the JR adapter that you suggested. It was not included in my box. Is this right? how can I get it ?
I appreciate your help !
Thanks
Luis
I received my AF5 and was abñe to installed in my Mac, but it can recognizes my JR X9503 or XP7202. I saw your answer about the JR adapter that you suggested. It was not included in my box. Is this right? how can I get it ?
I appreciate your help !
Thanks
Luis