El_JB

Hi every body,

I am from france and i have a problem with my spektrum DX7s and Aerofly 5.5.
My DX7s is not detected. And i have the new Ikarus cable with orange lead.

Can you help me ?

My config : OSX 10.7 , MacBook Aire 2011

Thanks

rajul

My Feedback: (58)

JB, please post a photo showing the cable connections between your radio and the computer.

El_JB

Hi Rajul,
Thanks for your answer .
Here is my cable and the connexion I made.
I have tested all the possibilities and the trainer mode on my dx7 in activate.

rajul

My Feedback: (58)

JB, the correct connection should be as shown in the diagram below. You will need the Ikarus y-adapter cable (p/n 31036) between the long cable and your DX7.

El_JB

thank you for you answer ! that's ok !!!!!!
I needed a Y cable witch was not included in the aerofly Pack.

Thanks a lot !
Best

duraphil

Just bought a new DX7s and a used (thru RC groups) Aerofly pro deluxe Platinum for Mac. Have it installed and running on the Macbook. I have exactly the same cables as in photo from moderator above. All connections double checked for tightness. The program sees the USB connection, but doesn't see the radio connected, in either the On or Off position. …..any suggestions, please…..
thanks, Phil

rajul

My Feedback: (58)

Phil, please start your own thread as per the forum rules.