Mudsurfer1234

Hi guys,

Anyone know the TMD for PPS/4D? i made the big 40% extra with the red drops electric, now i wanna make it 4D, but cant figure out what in the TMD to change. I have been comparing it to the Slowride-4D tmd to try and make it the same, but nothing changes.

Thanks!
Scott[8D]

Greg.B

Hi Scott,

Firstly have you definitely converted it to electric? Otherwise 4D won't work.

BW!

Greg.

Mudsurfer1234

you are the Number 1 person i was hoping would respond

Yes, i have converted the 40% extra to electric, ive also had the prop changed to 4D, however, whenever i put negative pitch on (pull throttle stick back) it crashes and makes aerofly crash.

the throttle also goes really high.

I was wondering how you made the 33% Hangar 9 Edge 540 4D? i saw that in a video, that's why im trying to do.

Thanks!!
Scott

Ian.W

you have to change the value thing....lol make the endpoints smaller.....greg!!!! help!!!

Greg.B

Hi Scott,

Here's some instuctions:

Below is are the necessary bits of a TMD file of a VPP plane,

The red lines mean that you need to change the original line to that.

The blue lines mean that you need to Replace the line in the TMD of the model you are working on with this line (put it in the same place if possible).

The purple arrows point to where you can change the "servo slow".

The green arrows point to where you can change the pitch (IF AFPD CRASHES EXIT AFPD AND MAKE THE PITCH LESS BOTH WAYS IN THE TMD!).

Hope this helps!

Greg.

Here's the copy of the bits you need to change in the TMD file:
__________________________________________________ _______________________________________

// aerofly professional --------------------------------------------------------
//
// file: xxxxxxxxxxxx.tmd
// version: 1.8.0
//
// type: 97
// lock: 0
//
// -----------------------------------------------------------------------------

Append tmdjoint00 Joint00
Append tmdjoint00 Joint01
Append tmdjoint00 Joint02
Append tmdjoint00 Joint03
Append tmdjoint00 Joint04
Append tmdjoint00 Joint22
Append tmdjoint00 Joint23
Append tmdjoint00 Joint24
Append tmdreceiver00 Receiver
Append tmdfuselage00 Fuselage
Append tmdwheel00 Leftwheel
Append tmdwheel00 Rightwheel
Append tmdwing00 LeftWing
Append tmdwing00 RightWing
Append tmdwing10 Leftstabilizer
Append tmdwing10 Rightstabilizer
Append tmdwing11 Stabilizer
Append tmdservo00 ServoRudder
Append tmdservo00 ServoElevator
Append tmdservo00 ServoLeftAileron
Append tmdservo00 ServoRightAileron
Append tmdpropeller10 Propeller
Append tmdengine10 Engine
Append tmdservo00 ServoThrottle
Append tmdservo00 ServoPitch
-
-
-
-
-
-
cd Propeller/
X = tmvector4r( 0.0000, 1.0000, 0.0000, 0 )
Y = tmvector4r( 0.0000, 0.0000, 1.0000, 0 )
Z = tmvector4r( 1.0000, 0.0000, 0.0000, 0 )
R = tmvector4r( 0.2399, 0.0063, 0.0064, 1 )
Geometry( "~Geometry/Propeller/" )
Mass = 0.01
RangeMassMax = 0.02
RangeMassMin = 0.005
Inertia = { 0.0004, 0.0000, 0.0000, 0.0000, 0.0000, 0.0004, 0.0000, 0.0000, 0.0000, 0.0000, 0.0004, 0.0000, 0.0000, 0.0000, 0.0000, 1.0000 }
Kn = 4000
Dn = 10
Dv = 5
Radius = 0.114306
RangeRadiusMax = 0.269592
RangeRadiusMin = 0.067398
Pitch = 0.126628
PitchMin = -0.04 <<<<<<<<<<<<<<<<<<<<<<<<
PitchMax = 0.09 <<<<<<<<<<<<<<<<<<<<<<<<
Cqq = 0.01
DragLateral = 0.45
Engine = ~Aircraft/Engine/
PitchControl = ~Aircraft/ServoPitch/MechLink
cd ../

cd Engine/
X = tmvector4r( 1.0000, 0.0000, 0.0000, 0 )
Y = tmvector4r( 0.0000, 1.0000, 0.0000, 0 )
Z = tmvector4r( 0.0000, 0.0000, 1.0000, 0 )
R = tmvector4r( 0.0727, 0.0000 , -0.0109, 1 )
Geometry( "~Geometry/Engine/" )
Mass = 0.064
RangeMassMax = 0
RangeMassMin = 0
Inertia = { 0.0000, 0.0000, -0.0001, 0.0000, 0.0000, 0.0002, 0.0000, 0.0000, -0.0001, 0.0000, 0.0002, 0.0000, 0.0000, 0.0000, 0.0000, 0.0340 }
Kn = 4000
Dn = 10
Dv = 5
-
-
-
-
-
cd ServoThrottle/
SignalIn = ~Aircraft/Receiver/Out(20)
P0 = 0
P1 = 1
P2 = 0
P3 = 0
PFirst = 0
Vmax = 50
X = tmvector4r( 1.0000, 0.0000, 0.0000, 0 )
Y = tmvector4r( 0.0000, 1.0000, 0.0000, 0 )
Z = tmvector4r( 0.0000, 0.0000, 1.0000, 0 )
R = tmvector4r( 0.0000, 0.0000, 0.0000, 1 )
Mass = 0
RangeMassMax = 0
RangeMassMin = 0
Inertia = { 0.0000, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000 }
Kn = 1000
Dn = 20
Dv = 5
cd ../

cd ServoPitch/
SignalIn = ~Aircraft/Receiver/Out(0)
P0 = 0
P1 = 1
P2 = 0
P3 = 0
PFirst = 0
Vmax = 50<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< <
X = tmvector4r( 1.0000, 0.0000, 0.0000, 0 )
Y = tmvector4r( 0.0000, 1.0000, 0.0000, 0 )
Z = tmvector4r( 0.0000, 0.0000, 1.0000, 0 )
R = tmvector4r( 0.0000, 0.0000, 0.0000, 1 )
Mass = 0
RangeMassMax = 0
RangeMassMin = 0
Inertia = { 0.0000, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000 }
Kn = 1000
Dn = 20
Dv = 5
cd ../

Mudsurfer1234

now for some reason the plane doesnt even show up when i hit fly, the view port looks at nothing, however it falls, the plane that isnt there crashes, and AFPD crashes and closes.

lol

this is fun! hehe

I think it's getting there though

Scott

Greg.B

Have you tried converting an electric plane such as the standerd Monsoon to 4D??? Then you may be able to tell if you are doing it wrong or not.

BW!

Greg.