ACE EXTRA 230 for IMAC
#1
Member
Thread Starter
Join Date: Jun 2003
Location: cypress,
CA
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
ACE EXTRA 230 for IMAC
Hi Guys just purchased a ace extra 230 30% scale from sheldons hobbies for $221 . i would like to try it in imac
my box stock 230 came out at 17 pounds with a moki 1.8 in it was a good flyer but way to heavy and under powered this one should come out at 15 pounds or under with a DA 50 in the nose
the kit will have alot of mods in it built up wing all the aircraft/birch ply wil be replaced with lite ply or balsa and carbon fiber
my midwest 300s came out at 12lb. 14 oz. with a moki 1.8 in it .
any advice on light weight hardware and a good servo choice for this project would be helpful
is there anywhere in southern california i can see someone fly the imac pattern?
thanks Jim
my box stock 230 came out at 17 pounds with a moki 1.8 in it was a good flyer but way to heavy and under powered this one should come out at 15 pounds or under with a DA 50 in the nose
the kit will have alot of mods in it built up wing all the aircraft/birch ply wil be replaced with lite ply or balsa and carbon fiber
my midwest 300s came out at 12lb. 14 oz. with a moki 1.8 in it .
any advice on light weight hardware and a good servo choice for this project would be helpful
is there anywhere in southern california i can see someone fly the imac pattern?
thanks Jim